Terms for subject Automobiles containing threads

English	Chinese
accuracy of thread	螺纹精度
Acme screw thread	英制梯形螺纹
Acme screw thread	埃克米螺纹
Acme thread	顶角为 29。 的美制梯形螺纹
adjusting thread	调节螺纹
American National Coarse Thread Series	美国粗牙螺纹系列
American Standard Internal Straight Pipe Thread	美国标准内直管螺纹
National pipe Thread American Standard Taper Pipe Thread	美国标准锥管螺纹
angle of thread	螺纹牙形角
B thread	内螺纹internal thread
body thread	气门嘴嘴体螺纹
British standard pipe thread	英制标准管螺纹
buttress thread	锯齿形螺纹
buttressed thread	锯齿形螺纹
cap thread	帽螺纹
class A thread	外螺纹 (external thread)
class B thread	内螺纹 (internal thread)
coarse-pitch thread	粗牙螺纹
complete thread	完整螺纹
connecting thread	连接螺纹
connection thread	连接螺纹
control thread	调节控制螺纹
cord thread	轮胎帘线
cord-thread breakage	轮胎帘布线断裂
cord-thread direction	帘线方向
core thread	气门嘴芯腔螺纹
cylindrical screw thread	螺钉普通螺纹
decorative thread	装饰线
depth of thread engagement	螺纹接触高度
drill-chuck with thread hole	螺纹孔钻夹头
exterior thread	外螺纹
extra fine thread	极第一种细牙螺纹
flat thread	方形螺纹
form of thread	螺纹牙型
full-thread	螺纹件全螺纹式的
groove of thread	螺纹谷槽
half of thread angle	螺纹牙型半角
height of thread	螺纹高深度
high hysteresis thread	高滞后阻力轮胎花纹
high hysteresis thread	高阻胎面
high hysteresis thread	高滞后花纹一种防滑的胎面花纹
inch thread	寸英制螺纹
internal thread broaching	内螺纹拉削
internal thread broaching	拉螺纹
ISO metrical fine thread	ISO 米制细牙螺纹
length of thread engagement	螺纹旋合长度
low hysteresis thread	低阻胎冠
low hysteresis thread	低滞后阻力轮胎花纹
male pipe thread	管外螺纹
male thread	阳外螺纹
maximum turning diameter of thread	最大车削螺纹直径
maximum turning length of thread	最大车削螺纹长度
metallic cord thread	钢丝金属帘线
metric screw thread	公制螺纹
metrical fine thread	公制米制细牙螺纹
milli-thread	普通螺纹牙形为60°角,螺距单位为毫米的螺纹
minus thread	负螺纹螺纹外径等于未切螺纹部分直径
minus thread	左旋螺纹
motion thread	传动螺纹
mouth thread	轮胎气门嘴螺纹
multiple thread	多头线螺纹
multiple-thread worm	多线蜗杆
multi-start thread	多线螺纹
National Fine Thread	美制国家细牙螺纹标准
national fine thread	美国家细牙螺纹标准
National pipe thread/American Standard Taper Pipe Thread	美国标准锥管螺纹
National Pipe Thread Coarse	美国标准管用粗螺纹
National Pipe Thread Fine	美国标准管用细螺纹
negative thread	阴内螺纹
normal thread diameter	螺纹公称直径
number of threads	头数
nut thread	螺母螺纹
nut with fine pitch thread	细牙螺母
one-thread worm	单头螺纹蜗杆
parallel screw thread	圆柱螺纹
pipe fitting thread turning machine	管接头螺纹车床
pipe thread	管端螺纹
pipe thread turning machine	管螺纹车床
plastic thread	塑料螺纹
plug thread	火花塞螺纹
plus thread	正右旋螺纹
recut thread	重切螺纹
right-hand thread	右旋齿
right-hand thread	正丝扣
rolled thread	滚压螺纹
round thread	圆牙螺纹
saw thread	锯齿形螺纹
screw thread pair	螺纹副
screw-in thread mounted injector	柴油机螺纹安装式喷油器
self-locking thread	自锁式螺纹
series coarse thread	粗牙螺纹系列
setting thread	调节止动螺纹
sharp thread	管螺纹
sharp thread	三角螺纹
sharp triangular thread	管螺纹
sharp triangular thread	三角螺纹
short-thread milling machine	短螺纹铳床
single thread	单头螺纹的
single-thread nut	金属板单螺纹螺母
slipped thread	滑线断缺螺纹
Society of Automotive Engineers thread	美国汽车工程师学会螺纹
spark-plug thread	火花塞配合火花塞的螺纹
spoke thread	辐条螺纹
square thread	方直角螺纹
straight thread pipe coupling	直螺纹管接头
straight thread	圆柱形直螺纹
stripped thread	断缺滑丝螺纹
table of threads	螺纹表
taper screw thread	圆锥螺纹
taper thread grinding	锥磨
thread bush	螺纹衬套
thread bush	螺纹套
thread caliper	螺纹距规
thread chasing	梳螺纹
thread crest	螺纹牙顶
thread cutting	旋风切削
thread-cutting lathemachine	螺纹车床
thread depth	胎纹深度
thread depth	胎面花纹沟深
thread depth	轮胎花纹深度
thread die	螺纹板牙
thread die cutting	套螺纹
thread drain	放水螺纹孔
thread drain	螺纹放液孔
thread drill	螺纹丝锥
thread engagement	螺纹啮接合
thread file	螺纹锉刀
thread gage	螺纹距规
thread gauge	螺纹距规
thread-grinding machine	螺纹磨床
thread hand	螺纹旋转方向
thread height	牙型高度
thread hole	螺纹孔
thread honing	珩螺纹
thread hysteresis	胎面阻力
thread hysteresis	轮胎花纹滞后阻力
thread insert	螺纹镶套
thread insert	螺纹衬套
thread lapping	研螺纹
thread locker	螺纹锁止剂
thread locking compound	螺纹锁止剂
thread locking paste	螺纹锁止剂
thread micrometer	螺纹千分尺
thread model	丝线模型
thread plug	螺纹塞
thread repair insert	螺纹套
thread restoring tool	螺纹修整工具
thread ridge thickness	螺纹牙厚
thread rolling	滚压螺纹
thread root	螺纹牙底根部
thread sealant	螺纹密封胶粘剂
thread sealing	螺纹密封
thread sealing compound	螺纹密封胶剂
thread size	螺纹尺寸
thread terminal	火花塞螺纹端子
thread tolerance	螺纹公差
thread turning cam	车丝凸轮
thread turning tool rest	车丝刀架
thread whirling	旋风铣螺纹
thread whirling	螺纹旋风铣削
thread whirling machine	螺纹旋风铣床
thread width	轮胎胎面宽度
thread with die	套螺纹
threads per inch	每英寸螺距数
trapezoid thread	梯形螺纹螺杆
trapezoidal screw thread	梯形螺纹
triangular thread	管螺纹
triple thread	三头线螺纹
U. S. customary thread	美国常用螺纹
U. S. customary threads	美制螺纹
Unified National Pipe Thread	美国家统一管螺纹
Unified National Pipe Thread	美国家统一管螺纹American Standard Taper Pipe Thread 美国标准锥管螺纹
unified special thread	统一的特种螺纹
united screw thread	统一标准螺纹
United States standard-thread	美国标准螺纹齿角60°
useful thread	有效螺纹
V thread	V 形螺纹
valve thread	轮胎气门嘴螺纹
valve thread	配气机构气门杆螺纹
valve-cap thread	轮胎气门嘴防护帽螺纹
valve-shank thread	气门杆螺纹线
valve-stem thread	气门杆螺纹
vanish thread	螺尾
warp thread	织物经线纱
wash-out thread	螺尾
weft thread	织物纬纱线
Whitworth thread pitch gauge	公制螺距规
wire thread insert	钢丝螺套用于修复磨损或损坏的内螺纹孔