Terms for subject Bridge construction containing compression

English	Chinese
area ratio of compression flange to gross section	受压翼缘与毛截面的面积比
axial compression test	轴向压力试验
axial compression test	轴压试验
axially loaded compression member	轴向受压杆
beam with compression steel	双筋梁
bearing compression stress parallel to grains	顺纹承压应力
bending compression and eccentric compression	弯曲受压及偏心受压
bending compression strength	弯曲抗压强度
bending stress in compression flange	压力翼缘中的弯曲应力
bottom compression flange	箱梁压力翼缘
buckling stress of column under combined axial compression and lateral pressure	轴向压力和侧向压力下柱的屈曲应力
built-up compression member	组合压杆
circular local compression area	圆形局部承压面积
clear distance from neutral axis to compression flange	中性轴至受压翼缘的净距
combination of compression and shear	压力与剪力的组合
compression area	受压面积
compression bar	压杆
compression bar	受压钢筋
compression bar with eccentricity	偏心受压杆
compression-bend combined member	压弯组合杆件
compression by concentrated forces	受集中力压缩
compression chord	压力弦杆
compression chord	受压弦杆
compression coefficient	压缩系数
compression component	分压力
compression-crushed zone	挤压破碎带
compression diagonal	受压斜杆
compression edge	压力边缘
compression face	受压面
compression fault	挤压断层
compression fiber	压力纤维
compression fiber	受压纤维
compression fissure	挤压裂缝
compression flange	压力翼缘
compression flange	受压翼缘
compression flange stiffened longitudinally	纵向加劲的受压翼缘
compression flange stiffened transversely	横向加劲的受压翼缘
compression flange width	压翼缘宽度
compression flange width	受压翼缘宽度
compression force line pressure line	压力线
compression fracture	压裂
compression in extreme fiber of member subjected to bending	受弯杆最外纤维中的压力
compression intensity	压力强度
compression layer	压缩层
compression member	受压杆件
compression member of truss	桁架受压杆
compression modulus of elasticity	弹性压缩模量
compression of arch rib	拱肋压缩
compression of upper flange	上翼缘压力
compression parallel to grain	顺纹受压
compression parallel to grain	平行木纹的压力
compression perpendicular to grain	横纹受压
compression perpendicular to grain	横纹压力
compression perpendicular to grain of timber	垂直木纹的压力
compression plate	压力板
compression reinforcement	压力钢筋
compression reinforcement	抗压钢筋
compression resistance	抗压
compression splitting test	压裂试验
compression strain	压应变
compression strain	受压应变
compression strength of cast-iron	铸铁抗压强度
compression stress	受压应力
compression stress perpendicular to grain	截纹压应力
compression stress wave	压应力波
compression web	压力腹板
compression zone	压力区
computing axial compression force	计算轴向压力
concentrically loaded compression member	受集中荷载的压杆
concrete compression strength	混凝土受压强度
consolidated drained triaxial compression test	固结排水三轴压缩试验 (CD-test)
consolidated slow compression test	固结慢压试验
consolidated-undrained triaxial compression test	固结不排水三轴压缩试验 (CU-test)
consolidation slow compression test	固结慢压试验
distance between centres of tension stress and compression stress	应力中心距
distance from extreme compression fibre to centroid of compressive reinforcements	最远受压纤维至受压钢筋重心的距离
eccentric compression member with ring section	环形截面偏心受压构件
eccentric compression pier with circular section	圆形截面偏心受压桥墩
eccentricity of compression force line	压力线偏心距
effective length of compression member	压力杆的有效长度
effective length of compression member	压杆的有效长度
effective length of compression members of trusses	桁架受压杆件的计算长度
elastic compression loss	弹性压缩损失
elastic compression of arch ring	拱圈弹性压缩
elastic compression of concrete	混凝土弹性压缩
external compression force	外压力
flexural compression stress	弯曲压应力
free contact radial compression between roller rocker and plate	辊轴摇轴与平板自由接触的径向受压
immediate compression force	瞬时压力
immersion unconfined compression test	浸水无侧限抗压试验
increment of compression force	压力增量
intensity of compression of live load	活载压力强度
laced built-up compression member	缀合式组合压杆
laced compression member	缀合压杆
lateral unsupported length of compression flange	受压翼缘侧向自由长度
local compression stress	局部承压应力
local compression stress	局部压应力
longitudinal compression reinforcement	纵向压力钢筋
member subjected to both axial compression and bending stresses	承受轴向压应力和弯曲应力的杆件
member subjected to compression plus biaxial bending	受压且双向弯曲的杆件
original compression curve	原始压缩曲线
plane compression strain test	平面压缩应变试验
plate compression element	板压力单元
radial compression when hinge axle is placed on bearing of cast steel hinge	铰轴放在铸钢铰轴颈上时的径向受压
ratio of half of width of compression flange to thickness	受压翼缘半宽与厚度之比
ratio of web area to compression flange area	腹板面积与受压翼缘面积之比
secondary compression index	次固结指数
secondary compression member	次压力杆
slenderness ratio of compression member	压杆的细长比
stability of compression member	压杆稳定
steel compression member	钢压杆
stiffened compression flange	加劲受压翼缘
tension and compression fatigue test	拉压疲劳试验
tension-compression fatigue limit	拉压疲劳极限
time-compression curve	时间-压缩曲线
transversely stiffened compression flange	横向加劲压力翼缘
twice the distance from the neutral axis to the inside face of the compression flange	中性轴至受压翼缘内侧的距离的两倍
unbraced compression chord	未支撑受压弦杆
unconfined compression strength	无侧限抗压强度
uniaxial compression test	单轴压力压缩试验
unstiffened compression flange	未加劲的受压翼缘
velocity of compression wave	压缩波速
welded compression bar with box-crosssection	焊接箱形截面杆件