Terms containing casting-speed

Subject	English	Chinese
met.	automatic decreasing of casting speed	拉坯速度自动降低
met.	automatic regulation of casting speed	拉速自动调整
met.	automatic response of casting speed	拉坯速度自动响应
plast.	casting belt speed	流延环带速度
cont.cast.	casting speed	拉坯速度
met.	casting speed	浇注速度
met.	casting speed	【连】 拉坯速度
met.	casting speed	拉速 (【技】单位时间内连铸机的每一流拉出的铸坯长度。拉坯速度简称拉速。 • Powder consumption decreases gradually until a casting speed of 5m/min, and gradually approaches the fixed value when the casting speed is over 5m/min. 保护渣用量逐渐降低，直到拉坯速度到达5 m/min 为止；拉坯速度超过5 m/min 后，保护渣用量逐渐趋近固定值。)
tech.	casting speed	铸造速度
met.	casting speed limit	拉坯速度极限
met.	casting speed min. /max. 1/2. 5 m/min.	拉坯速度最低/最高1/2. 5m/min
met.	casting speed of billet caster	小方坯连铸机拉速
met.	casting speed of slab	板坯拉速
met.	casting speed of slab caster	板坯连铸机拉坯速度
met.	casting speed of super low head continuous caster	超低头连铸机拉坯速度
met.	casting speed range	拉坯速度范围
met.	casting speed range	拉速范围
met.	casting speed response to breakout alarm	漏钢报警的拉坯速度响应
met.	computer-controlled casting speed	计算机控制的拉速
met.	constant casting speed	恒定拉坯速度
met.	constant-speed casting	恒速浇铸
met.	constant-speed continuous casting	恒速连铸
met.	continuous casting at constant casting speed	恒速连铸
met.	continuous casting machine with high casting speed	高拉速连铸机
met.	continuous casting of high-speed steel	高速钢连铸
met.	control of casting speed	【连】 拉坯速度控制
met.	controlling of casting speed	控制拉坯速度
met.	critical casting speed	临界拉坯速度 (Further simulations were performed by them to predict this critical casting speed as a function of section size and working mold length (distance from meniscus to mold exit). 为了预测作为断面尺寸和结晶器工作长度(金属弯月面至结晶器出口的距离)函数的临界拉坯速度，他们进行了进一步的模拟。)
met.	critical casting speed based on cracking criterion	基于裂纹判据的临界拉速
met.	critical casting speed based on shell thickness criterion	基于坯壳厚度判据的临界拉速
met.	design casting speed	设计拉速
met.	designed casting speed	设计拉速
met.	dynamic control of casting speed	拉坯速度动态控制
met.	flux for high-speed continuous casting	高速连铸用保护渣
met.	given casting speed	给定拉坯速度
met.	goal casting speed	目标拉速
met.	high casting speed at low superheat	低过热度快铸
met.	high casting speed caster	高拉速连铸机
met.	high casting speed powder	高拉速连铸保护渣
met.	high casting speed slab caster	高速板坯连铸机
met.	high speed billet casting mould	高速连铸小方坯结晶器
met.	high-speed continuous casting of slab	高速板坯连铸
met.	high-speed continuous casting of thin slab	薄板坯高速连铸
met.	high-speed continuous casting of ultra low carbon steel	超低碳钢高速连铸
met.	high-speed continuous casting process	高速连铸法
met.	high-speed continuous casting technology	高速连铸技术
met.	high-speed continuous casting technology for steel strip	高速带钢连铸技术
met.	high-speed continuous strip casting technology	高速带钢连铸技术
met.	initial casting speed	【连】起步拉速
met.	liquid-level casting-speed control method	液位-拉速控制法
met.	low casting speed caster	低拉速连铸机
met.	maximum casting speed	最高拉坯速度
met.	maximum designed casting speed	最大设计拉速
met.	measure of casting speed	拉坯速度测量
met.	measured casting speed	实测拉坯速度
met.	medium/ fast range of casting speeds	中速和高速铸造范围
met.	medium/ fast range of casting speeds	中速和高速铸造区
met.	method of slowing casting speed	【连】 降低拉速法 (【技】降低拉速法是一种有效处理和防止粘结漏钢的一种方法。发现粘结漏钢苗头或接到粘结漏钢预报，应降低拉坯速度，待拉断的坯壳愈合后，再逐渐将拉速提高到正常水平。)
met.	normal casting speed	正常拉坯速度
met.	operating casting speed	稳态拉速
met.	operating casting speed	工作拉速
met.	operating casting speed	【连】 操作拉速
met.	operation casting speed	稳态拉速
met.	operation casting speed	工作拉速
met.	operation casting speed	操作拉速
met.	peak casting speed	最高拉坯速度
met.	peak casting speed	峰值拉坯速度
met.	powder for high casting speed	高拉速连铸保护渣
met.	recommended value for casting speed	拉坯速度推荐值
met.	response of casting speed to breakout alarm	漏钢报警的拉坯速度响应
met.	slab casting speed	板坯拉速
met.	steady-state casting speed	操作拉速
met.	steady-state casting speed	工作拉速
met.	steady-state casting speed	稳态拉速
met.	target casting speed	目标拉速
met.	theoretical casting speed	理论拉坯速度
met.	upper limit of casting speed	拉坯速度上限
met.	working casting speed	操作拉速
met.	working casting speed	稳态拉速 (【技】指的是在正常连铸生产中所使用的拉坯速度。应根据钢种、钢水温度、冷却强度等因素合理确定操作拉速。)
met.	working casting speed	工作拉速