| Subject | English | Chinese |
| gen. | a bit | 一点 |
| gen. | a bit | 稍稍 |
| gen. | a bit at a time | 一点儿一点儿地 |
| gen. | a bit at a time | 慢慢地 |
| gen. | a bit much | 有点过分了 |
| gen. | a bit of | 少量的 |
| gen. | a bit of | 一点儿 |
| inf. | a bit of a... | 相当后接名词，常指不愉快的人或事 |
| inf. | a bit of a... | 有点儿… |
| gen. | a bit of advice | 一项建议〔劝告〕 |
| inf. | a bit of all right | 极为称心如意的事或人 |
| gen. | a bit of one's mind | 痛骂 |
| gen. | a bit of one's mind | 直言不讳的批评 |
| inf. | a bit off | 失常 |
| inf. | a bit off | 有点怪 |
| gen. | a good bit | 颇大 |
| gen. | a good bit | 颇为 |
| gen. | a little bit | 有点儿 |
| gen. | a little bit | 少许 |
| gen. | a very pretty bit of trickery | 一种很巧妙的手段 |
| gen. | a wee bit | 少许 |
| gen. | a wee bit | 一点儿 |
| gen. | a wee bit | 有些 |
| shipb. | address bit | 地址位计算机术语 |
| tech. | annular bit | 环形钻 (头) |
| tech. | annular bit | 圆锯 |
| shipb. | annular bit | 环形钻 |
| tech. | annulated bit | 环形钻头 |
| tech. | Appleman gumbo bit | 底喷式鱼尾钻头 |
| multimed. | audio bit depth | 音频位深度 |
| CNC | auger bit | 麻花钻 |
| avia. | auto bit error rate test | 自动数位误差率测试 |
| tech. | auxiliary cutter bit | 辅助切力 |
| multimed. | available bit rate | 可用位速率 |
| avia. | average bit error rate | 平均误差比特率 |
| tech. | average trip bit speed | 平均行程钻速 |
| tech. | big-stone bit | 粗粒金刚石钻头 (粒度为1克拉8颗以上) |
| tech. | big-stone bit | 大粒金刚石钻头 |
| multimed. | bit allocation | 位分配 |
| multimed. | bit block transfer | 位块传送 |
| gen. | bit by bit | 一位一位地 |
| gen. | bit by bit | 渐次地 |
| gen. | bit by bit | 逐位地 |
| gen. | bit by bit | 逐渐地 |
| gen. | bit by bit | 一点儿一点儿地 |
| multimed. | 2-bit byte | 两位字节 |
| avia. | bit chuck | 钻夹头 |
| multimed. | 32-bit color 32 | 位颜色 |
| shipb. | bit cutting angle | 钻头刃角 |
| multimed. | 1-bit DAC | 1 比特流数字转换器 |
| shipb. | bit dressing crane | 修整钻头用起重机 |
| multimed. | bit-field | 位段 |
| CNC | bit fingers | 钻头堵销 |
| multimed. | bit flipping | 位翻转 |
| CNC | bit holder | 钻套 |
| mineral. | bit load | 俗称钻压 |
| mineral. | bit load | 钻井机进给力 |
| CNC | bit location | 数位位置 |
| comp. | bit manipulation | 二进制数字处理 |
| CNC | bit manipulation | 数字处理 |
| CNC | bit manipulation | 二进制处理 |
| comp. | bit manipulation | 二进制运算 |
| multimed. | bit manipulation | 位操作 |
| gen. | bit of a place | 一个小小的地方 |
| securit. | bit of a rebound | 一点反弹 |
| inf. | bit of information | 信息量子(单)位 |
| gen. | bit-oriented | 按位存取的 |
| multimed. | bit-oriented protocol | 面向位协议 |
| shipb. | bit per inch | 位数每英寸 |
| shipb. | bit per inch | 位每英寸 |
| gen. | bit-per-word counter | 每词一位的计数器 |
| gen. | bit player | 小型显示器 |
| multimed. | bit rate reduction | 比特率压缩 |
| gen. | bit/second | 比特/秒 |
| gen. | bit/second | 位/秒 |
| gen. | bit-serial adder | 位串行加法器 |
| gen. | bit-slice access | 位片访问 |
| multimed. | bit slice processor | 位片微处理器 |
| multimed. | bit-sliced arithmetic coding | 位片算术编码 |
| avia. | bit storage density | 二进制位数存储密度 |
| gen. | bit-string | 字位行 |
| avia. | bit sync generator | 二进制同步信息发生器 |
| gen. | bit-time | 二进时间 |
| gen. | bit-time | 一位〔一拍，比特〕时间 |
| gen. | bit-type | 位型 |
| CNC | bit weight | 钻头负荷 |
| multimed. | bit-wise | 逐位操作 |
| gen. | bit-write | 数位记录的 |
| tech. | blank bit | 圆钻头 |
| tech. | blank bit | 空白钻头 |
| tech. | blank-casing bit | 空白套管钻头 |
| tech. | bob-clearing bit | 非自洁式钻头 |
| tech. | bore bit | 钻头 (钻孔用) |
| gen. | bore-bit | 钎头 |
| CNC | bore bit | 镗孔钻头 |
| gen. | bore-bit | 镗孔，勘探钻头 |
| tech. | boring bit | 活钻头 |
| tech. | boring bit | 钻探钻头 |
| tech. | boring bit | 活钎头 |
| shipb. | boring bit | 孔钻头 |
| tech. | boring blade bit | 钻探用桨叶式钻头 |
| tech. | boring core bit | 取岩芯钻头 |
| gen. | borywa bit | 旋转式环形钻头 |
| gen. | borywa bit | 齿状钻头 |
| tech. | bottoming bit | 活钻头 |
| tech. | bottoming bit | 可卸钻头 |
| tech. | bottoming type bit | 活动钻头 |
| tech. | bottoming type bit | 可卸式钻头可卸式钎头 |
| tech. | bottoming type bit | 孔底可卸式钻头 |
| tech. | brace and bit | 手摇曲柄钻 |
| tech. | brace bit | 钻孔器 |
| tech. | brace bit | 手摇曲柄钻 |
| tech. | brace bit | 曲柄钻 (孔器) |
| tech. | brace bit | 摇钻 |
| tech. | brace bit | 弓钻 |
| tech. | brace bit with depth gage | 带深度规钻头 |
| tech. | brace bit with depth gauge | 带深度规钻头 |
| tech. | bracing the bit | 支撑钻头 |
| tech. | button bit | 碳化钨钻头 |
| tech. | button bit | 球齿形钎头 |
| gen. | carbide-tipped cutter bit | 硬质合金刀头 |
| gen. | carbide-tipped cutter bit | 硬质合金刀刃 |
| tech. | carboloy-set bit | 硬质合金胎体的钻头 |
| CNC | carbon bit | 金刚石钻头 |
| shipb. | carbon tool steel bit | 碳素工具钢车刀 |
| multimed. | carry bit | 进位位 |
| avia. | carry into bit | 进位输人位 |
| shipb. | cast set diamond bit | 铸镶金刚石钻头 |
| tech. | central bit | 中心钻头 |
| tech. | centre bit | 转柄钻 |
| tech. | centre bit | 三叉钻头 |
| tech. | centre bit | 中心钻 (头) |
| tech. | centre bit | 打眼锥 |
| tech. | centre bit | 矛式钻头 |
| tech. | centre jet drill bit | 中心喷射式钻头 |
| tech. | centre-hole bit | 中心水口式钻头 |
| tech. | changing of bit | 调换钻头 |
| multimed. | channel bit | 通道位 |
| avia. | check bit | 监督位 |
| tech. | checking bit | 奇偶校验位 |
| avia. | checking bit | 监督位 |
| shipb. | chisel bit | 冲击钻头 |
| nautic., tech. | classic bit | 经典比特 (Cbit) |
| tech. | clock bit | 时钟位 |
| tech. | command bit | 命令位 |
| gen. | cone bit | 锥形钻头 |
| tech. | configuration bit | 结构位 |
| avia. | constant bit density | 等比特密度 |
| multimed. | constant bit rate | 恒定比特率 |
| multimed. | constant bit rate/bitrate | 恒定位速率 |
| avia. | continuous bit rate | 连续比特率 |
| tech. | convex bit | 中心凸出钻头 |
| gen. | Could you please be a little bit quicker? I'm in a hurry | 你能快一点吗？我赶时间 |
| avia. | countersink bit | 埋头钻 |
| mater.sc. | critical bit density | 临界位密度 |
| gen. | cross bit | 十字〔星形〕钻头 |
| avia. | current data bit | 现行二进制数据位 |
| tech. | cutting bit | 切刀 |
| tech. | cutting bit | 钻头 |
| tech. | cutting type coring bit | 切削型取芯钻头 |
| tech. | cylinder bit | 圆柱钻 |
| multimed. | data bit | 数据位 |
| tech. | deflecting bit | 偏斜钻头 |
| comp. | deletion bit | 删除位 |
| tech. | detachable bit | 可拆卸式钻头 |
| tech. | detachable bit | 活动钻头 |
| tech. | detachable bit | 可卸式钻头 |
| tech. | detachable bit | 活络钻头 |
| tech. | detachable bit | 可拆卸钻头 |
| shipb. | detachable bit | 可拆卸的钻头 |
| tech. | detachable tungsten carbide insert bit | 碳化钨合金补强的可拆卸式钻头 |
| gen. | deuce a bit | 一点儿不 |
| gen. | deuce a bit | 完全不 |
| tech. | device selection bit | 设备选择位 |
| biol. | devil's bit | 切落草 (Succisa pratensis Moench; Scabiosa succisa L.) |
| biol. | devil's bit | 切落草属 (Succisa Neck.，川续断科) |
| CNC | diamond bit | 金刚钻头 |
| gen. | diamond-bit setter | 金刚石钻头镶嵌工 |
| gen. | diamond-inset annular bit | 环冠状金刚砂钻头 |
| CNC | disposable toolholder bit | 舍弃式刀头 |
| gen. | do one's bit | 尽自己的本分 |
| comp. | dominant bit | 最大位 |
| comp. | dominant bit | 主位 |
| tech. | double arc bit | 双弧钻头 |
| tech. | double bit error | 双位错误 |
| tech. | double chisel drill bit | 二字形钻头 |
| tech. | double chisel drill bit | 双錾头钻头 |
| tech. | double hollow bit tongs | 十字空心钳 |
| tech. | double lip countersink bit | 带安全锥埋头钻头 |
| tech. | double round nose bit | 凸圆弧金刚石钻头 (圆弧直径等于壁厚) |
| tech. | double taper bit | 双斜刃钎头 |
| tech. | double taper bit | 双锥钻头 |
| tech. | double-fluted bit | 双檐钻头 |
| tech. | draw-bit | 松紧针钩 |
| gen. | draw bit | 停止 |
| shipb. | dress bit | 修整用钻头 |
| tech. | dressing bit | 修整钻头 |
| tech. | dressing bit tongs | 多整钻头用夹钳 |
| tech. | dressing bit tongs | 钻头修理钳 |
| avia. | drill bit | 强钻头 |
| avia. | drill bit | 【矿】钎头 |
| shipb. | drill bit footage | 钻头进尺 |
| shipb. | drill-bit grinder | 钻头磨床 |
| shipb. | drill-bit grinding machine | 钻头磨床 |
| securit. | drill-bit stock | 钻头股股价低于一美元的股票 |
| securit. | drill-bit stock | 低价股 |
| gen. | drilling bit comprises three toothed wheels | 钻头带有三个牙轮 |
| tech. | drive bit | 打入式钻头 |
| comp. | eight bit | 八位二进制 |
| comp. | eight bit | 八位 |
| tech. | electrical rock drill bit | 电动钻岩机钻头 |
| tech. | electrical soldering bit | 电烙铁头 |
| nautic., tech. | entanglement bit | 纠缠比特 (E-bit) |
| gen. | every bit | 全然 |
| gen. | every bit | 完全 |
| gen. | every bit | 全部 |
| gen. | every bit | 从任何一点看 |
| gen. | every bit | 完完全全 |
| gen. | every bit | 各方面 |
| gen. | every bit | 每一点 |
| tech. | expanding bit | 伸缩钻头 |
| shipb. | expansion bit | 伸缩式钻头 |
| tech. | extended gage bit | 加长保径钻头 |
| tech. | eye bit | 钩环扁钻 |
| tech. | face discharge bit | 底冲式钻头 |
| tech. | face discharge bit | 唇面排水眼钻头 |
| tech. | face ejection bit | 底冲式钻头 |
| tech. | face ejection bit | 唇面排水孔钻头 |
| tech. | face ejection bit | 唇面排水眼钻头 |
| tech. | fishtail bit | 鱼尾形钻头 |
| tech. | fishtail bit | 鱼尾钻 |
| tech. | flag bit | 标志位 |
| tech. | flat bit | 扁钻 |
| tech. | flat bit | 平钻 |
| tech. | flat bit tongs | 平口钳 |
| tech. | flat drill bit | 扁钻头 |
| tech. | flat-faced bit | 平面金刚石钻头 |
| tech. | flat-faced bit | 平端面金刚石钻头 |
| tech. | flat-head bit | 平头钻 (头) |
| tech. | flat-nose bit | 平端面金刚石钻头 |
| tech. | flat-nose bit | 平面金刚石钻头 |
| gen. | four-bit | 四位组 |
| gen. | four-bit | 四位字节 |
| geol. | four wing rotary bit | 十字形钻头 |
| gen. | framing bit | 帧划分位 |
| biol. | frog's-bit | 水鳖马尿花，Hydrocharis morsus-ranae L. |
| biol. | frog's-bit | 水鳖属 (Hydrocharis L.，水鳖科) |
| biol. | frog's-bit family | 水鳖科 (Hydrocharitceae) |
| gen. | gag-bit | 驯马用的衔铁 |
| tech. | gallows bit | 船甲板中央木架 |
| tech. | gallows bit | 双柱吊架 |
| gen. | gauge bit | 成形车刀 |
| tech. | gauge milled bit | 保径镶焊铣齿钻头 |
| tech. | gauge of bit | 钻头直径 |
| tech. | gauge TCI bit | 保径镶焊镶齿钻头 |
| tech. | geophysical jetting bit | 物探钻孔用喷射式钻头 |
| gen. | get the bit between one's teeth | 桀骜不驯 |
| gen. | get the bit between one's teeth | 马咬着嚼子狂奔 |
| gen. | get the bit in one's teeth | 桀骜不驯 |
| gen. | get the bit in one's teeth | 马咬着嚼子狂奔 |
| tech. | green bit | 烧坏的钻头 |
| shipb. | hand drive gear transmission bit | 手摇研磨器 |
| shipb. | handset bit | 活钻头 |
| gen. | have a bit better time of it | 情况稍微好一些 |
| gen. | have the bit between one's teeth | 桀骜不驯 |
| gen. | have the bit between one's teeth | 马咬着嚼子狂奔 |
| gen. | have the bit in one's teeth | 桀骜不驯 |
| gen. | have the bit in one's teeth | 马咬着嚼子狂奔 |
| gen. | heal bit | 弹簧车刀 |
| shipb. | hexagon bit | 六角钎子 |
| multimed. | high bit-rate digital subscriber line | 高位速率数字用户线 |
| tech. | hole-per bit | 一个钻头进尺数 |
| desert. | hollow bit | 空心钻 |
| gen. | I don't feel very well. I think I am a little bit airsick | 我有点难受，可能是有些晕机 |
| gen. | I feel a bit cold when I sleep. Please get me a blanket | 我睡得有点冷，请给我加一条毯子 |
| gen. | I hope so, but I still feel a bit nervous | 希望如此吧，但是我仍然感到紧张啊 |
| gen. | I like a good horror movie, so I am a bit conflicted when it comes to the movie The Strangers | 我喜欢优秀的恐怖电影，所以当看电影《陌生人》时，我感到了些许的矛盾 |
| sport. | I'm a bit out of shape and I was thinking of joining your gym | 我身材有点走样，考虑加入你们的健身俱乐部 |
| tech. | invalid bit | 无效位 |
| tech. | junk bit | 端面铣刀 |
| gen. | Just a minute, please. Your baggage is a little bit overweight. It's two kilos | 请稍等。您的行李超重了一点，超了两公斤 |
| avia. | last significant bit | 最低有效位 |
| gen. | least bit | 丝毫 |
| CNC | Least Significant Bit | 最低位 |
| comp. | least significant bit | 最低最右二进制数位 |
| avia. | low bit-rate digital subscriber line | 低比特率数字用户线 |
| avia. | low bit rate voice | 低比特率语音 |
| tech. | marker bit | 标记位 |
| comp. | match bit | 符合位 |
| avia. | minimum impulse bit | 火箭发动机单脉冲的最小冲量 |
| avia. | minimum impulse bit at MEPW | MEPW 最小电子脉冲宽度下的单个脉冲的最小冲量 (minimum electrical pulse width) |
| tech. | mode bit | 模式位 |
| tech. | mode bit | 方式位 |
| tech. | mode bit | 状态位 |
| tech. | mode bit wire | 方式位线 |
| comp. | most significant bit | 最高最左二进制数位 |
| multimed. | most significant bit | 最高有效字位 |
| CNC | Most-Significant Bit | 最高位 |
| gen. | mudded bit | 卡钎 |
| nautic., tech. | multiple bit | 多重比特 (multibit) |
| avia. | multiple bit error | 重码错误 |
| avia. | multiple bit error | 多位误差 |
| tech. | multiple cone bit | 多牙轮钻头 |
| tech. | multiple roller bit | 多牙轮钻头 |
| gen. | multiplex aggregate bit rate | 多路聚合比特率 |
| comp.name. | New Technical Rock Bit Company | 美国新技术牙轮岩石钻头公司 |
| gen. | No, not a bit. It's too formal at first. We had to listen to those irrelevant speeches | 没有，一点也没吃好。开始太严肃。我们得听那些无关的讲话 |
| gen. | No way./ Not a bit. | 根本不行。 |
| gen. | not a bit | 一点儿也 (of) |
| gen. | not a bit | 一点儿也不 (of it) |
| gen. | not a bit | 一点儿没有 (of) |
| gen. | not a bit | 并不 (of) |
| gen. | not a bit | 决不 (of) |
| gen. | not a bit | 毫不 (of it) |
| gen. | not care a bit | 毫不在乎 |
| tech. | octagonal pillar tungsten carbide bit | 八角柱状硬合金钻头 |
| gen. | Once the new subway lines are built, that should ease the congestion a bit | 新的地铁线路开通之后，也许能缓解交通的压力 |
| gen. | one-core-per-bit memory | 每位一个磁芯存储器 |
| tech. | overman bit | 管状钻头 |
| gen. | parallel-by-bit | 位并行 |
| multimed. | parity bit | 校验位 |
| avia. | periodic BIT | 周期性机内自检测 |
| comp. | phase bit | 定位相 |
| CNC | pin bit | 手摇钻头 |
| tech. | plane bit | 刨刀 |
| gen. | pounds per inch of bit diameter | 每英寸钻头直径磅数 |
| avia. | power-up bit test | 上电自检 |
| avia. | preflight BIT | 飞行前机内自检测 |
| tech. | processed bit | 成批生产的钻头 |
| tech. | processed bit | 工厂生产的钻头 |
| tech. | punctuation bit | 标长位 |
| tech. | punctuation bit | 标示长度位 |
| tech. | purified bit speed | 完全净化钻速 |
| avia. | qualifying bit | 限定位 |
| comp. | qualifying bit | 指示位 (Q-bit) |
| comp. | qualifying bit | 限制位 (Q-bit) |
| nautic., tech. | quantum bit | 量子比特 (Qbit) |
| tech. | quill bit | 有纵槽的长钻头 |
| comp. | read bit feedback | 读出位反馈 |
| multimed. | real media variable bit rate | RMVB 格式 |
| multimed. | real media variable bit rate | 实时媒体可变位速率 |
| multimed. | real-time variable bit rate | 实时可变比特率 |
| tech. | reamer bit | 扩孔钻 |
| tech. | reamer bit | 铰刀 |
| tech. | reamer bit | 扩张钻 (头) |
| tech. | reaming bit | 绞孔钻 |
| tech. | reaming bit | 绞孔锤 |
| tech. | reaming bit | 铰孔锥 |
| gen. | regrind bit | 重磨钻头 |
| gen. | remarkable bit of | 相当多的 |
| CNC | removable bit | 活钻头 |
| tech. | rerun a bit | 使用修磨过的钻头 |
| tech. | rest diamond bit | 回收金刚石钻头 |
| tech. | restricted bit | 小水眼钻头 |
| tech. | retractable core bit | 可换式岩芯钻头 |
| tech. | retractable core bit | 可收回钻头 |
| tech. | retractable rock bit | 活动钎头 |
| tech. | retractable rock bit | 可换式牙轮钻头 |
| tech. | reversed fishtail bit | 反鱼尾钻头 |
| tech. | ring auger bit | 活把手麻花钻 |
| tech. | ring bit | 环形钻头 |
| tech. | ring bit | 活把麻花钻 |
| gen. | rock bit | 凿岩钻〔钎〕头 |
| comp.name. | Rock Bit International | 美国国际牙轮钻头公司 |
| energ.ind. | roller bit | 压轮钻头 |
| avia. | round bit tongs | 圆嘴钳 |
| tech. | round-face bit | 圆底唇钻头 |
| tech. | round-face bit | 圆端面钻头 |
| tech. | round-nose bit | 圆唇钻头 |
| tech. | round-over bit | 四分之一圆铣刀 |
| tech. | saw bit | 齿状钻头 |
| tech. | saw bit | 锯片 |
| tech. | saw-tooth bit | 锯齿状钻头 |
| CNC | screw driver bit | 螺钉旋具 |
| tech. | self-cleaning bit | 自清式钻头 |
| tech. | self-sharpening bit | 自磨钻头 |
| tech. | semi-circular profile bit | 唇面半圆形钻头 |
| tech. | semi-spheric bit | 半球形钻头 |
| gen. | serial-by-bit | 按位串行处理 |
| comp. | seven-bit byte | 七位字节 |
| tech. | shank of bit | 钻杆 |
| biol. | Sheep's-bit | 山甲虫草 (Jasione montana L.) |
| biol. | Sheep's-bit | 甲虫草属 (Jasione L.，桔梗科) |
| tech. | shell bit | 筒式钻头 |
| tech. | shell bit | 筒形钻 |
| tech. | shell bit | 木工打孔钻头 |
| tech. | shell bit | 壳形钻 |
| avia. | single bit | 单码位 |
| avia. | single bit error | 单比特错误 |
| tech. | sinter-set bit | 烧结硬质合金钻头 |
| avia. | six bit code | 六单位制电码 |
| tech. | six-cone bit | 六牙轮钻头 |
| tech. | six-point bit | 六刃钻头 |
| tech. | six-point bit | 六刃钎头 |
| tech. | six-point bit | 星形钻 (头) |
| tech. | six-roller bit | 六牙轮钻头 |
| tech. | skirt of bit | 钻头扩大部分 |
| comp. | smudge bit | 污位 |
| gen. | snaffle-bit | 马衔铁 |
| gen. | snaffle-bit | 马的圈嚼子 |
| tech. | spare bit | 备用位 |
| tech. | spring bit | 打眼钻 |
| tech. | star bit | 梅花钻头 |
| tech. | star-pattern drilling bit | 十字钻头 (冲击钻用) |
| tech. | star-shaped bit | 星形钻 (头) |
| multimed. | start bit | 起始位 |
| tech. | star-type bit | 十字形钻 (头) |
| tech. | steel bit | 未镶钻头 |
| tech. | steel bit | 空白钻头 |
| tech. | steel bit | 钢刀刃 |
| tech. | steel bit | 钢钻头 |
| tech. | steel bit | 钢刀片 |
| tech. | steel drill bit | 钢钻头 |
| tech. | steel rip bit | 凿岩钢钎头 |
| tech. | steel rip bit | 凿岩钢钻头 |
| tech. | steel tooth bit | 钢齿牙轮钻头 |
| comp. | sticky bit | 黏结位 |
| tech. | stinger bit | 穿孔刀具 |
| tech. | stinger bit | 穿孔刀片 |
| tech. | stinger bit | 切锉刀具 |
| tech. | stinger bit | 切锉刀片 |
| tech. | streamlined waterway bit | 带流线型水槽的钻头 |
| tech. | stuck bit | 卡住的钻头 |
| tech. | sub for bit and auger-stem | 钻柄和钻头间的连接 (宾夕法尼亚索钻) |
| gen. | Sure, but it takes a little bit time | 好的，不过要等一等 |
| gen. | take a bit of doing | 难搞 |
| gen. | take the bit between one's teeth | 桀骜不驯 |
| gen. | take the bit between one's teeth | 马咬着嚼子狂奔 |
| gen. | take the bit in one's teeth | 桀骜不驯 |
| gen. | take the bit in one's teeth | 马咬着嚼子狂奔 |
| tech. | tangential bit | 切线车刀 |
| tech. | tangential bit | 切向车刀 |
| avia. | taper bit | 锥形铰 |
| tech. | ten-bit component | 十位分量 |
| gen. | the deuce a bit | 完全不 |
| gen. | the deuce a bit | 毫不 |
| gen. | the devil a bit | 完全不 |
| gen. | the devil a bit | 毫不 |
| gen. | The dimension of the bed sheets you buy should be a little bit larger than the actual dimension of the bed | 您购买的床单尺寸最好比床的实际尺寸稍微大一些 |
| gen. | This stew is a bit greasy | 这炖肉有点腻 |
| comp. | three-bit byte | 三位字节 |
| gen. | threeway bit | 三翼钻头 |
| tech. | throwaway bit | 不重磨车刀 |
| tech. | throwaway bit | 一次性钻头 |
| CNC | tool bit | 刀头 |
| tech. | touching point of bit | 钻孔定位 |
| tech. | trace bit | 跟踪位 |
| tech. | transmission mode bit | 传输方式位 |
| nautic., tech. | trebling bit | 三重比特 (Tribit) |
| gen. | two-bit | 无价值的 |
| gen. | two-bit | 便宜的 |
| comp. | two bit byte | 二位字节 |
| tech. | two-bit-time-adder | 双拍加法器 |
| gen. | two bit wide slice | 二位式芯片 |
| tech. | two-bladed bit | 双刃钻头 |
| tech. | two-cone bit | 双锥牙轮钻头 |
| tech. | two-cone bit | 二牙轮钻头 |
| tech. | two-core per bit | 双磁芯存储方式 |
| tech. | two-core per bit | 每位两个磁芯 |
| tech. | two-core per bit system | 每位两磁芯系统 |
| gen. | two-core-per-bit | 每位两磁芯的 |
| tech. | two-disc bit | 双圆盘钻头 |
| tech. | two-disk bit | 双圆盘钻头 |
| tech. | two-flute bit | 双槽钻头 |
| tech. | two-point bit | 一字形钎头 |
| tech. | two-point bit | 双刃钻头 |
| tech. | two-point bit | 一字形钻头 |
| tech. | two-way bit | 双翼钻头 |
| tech. | two-way bit | 鱼尾形钻头 |
| gen. | U-bit | U形钻头 |
| multimed. | unspecified bit rate | 未指定比特速率 |
| gen. | up to the bit | 听话 |
| gen. | up to the bit | 马顺从驾驭 |
| multimed. | variable bit-rate | 可变比特率 |
| multimed. | variable rate bit stream | 可变速率位流 |
| tech. | vertical tipped bit | 直镶式钻头 |
| multimed. | very high bit mte digital subscriber line | 甚高数据速率数字用户线路 |
| tech. | very high bit rate digital subscriber line | 甚高比特率数字用户线系统 |
| tech. | vibration bit | 振动钻头 |
| gen. | wait a bit | 稍等 |
| gen. | wait a bit | 等一下 |
| tech. | wall scraper bit | 井壁刮刀钻头 |
| tech. | wall scraper bit | 孔壁刮刀钻头 |
| shipb. | wedge bit | 校偏楔形钻头 |
| gen. | wee bit | 相当 |
| gen. | wee bit | 少许 |
| gen. | wee bit | 有些 |
| gen. | wee bit | 真正一点点 |
| tech. | weighted 4 bit code | 加权的四位代码 |
| tech. | winged scraping bit | 翼状钻头 |
| tech. | wire-line bit | 绳索式钻头 |
| tech. | wire-line bit | 投入式钻头 |
| tech. | wire-line core bit | 钢索取芯钻头 |
| tech. | wire-line core bit | 绳索取芯钻头 |
| tech. | wire-line coring bit | 绳索取芯钻头 |
| CNC | worm bit | 螺旋钻头 |
| gen. | Would you tidy up a bit in the bathroom? | 请整理一下浴室好吗？ |
| comp. | z-bit | 零码位 |
| comp. | z-bit | 零位 |
| comp. | zero bit | 零码位 |