Subject: side feeder port side feeder port - ??Встречается в контексте: Woodforce is made of high density, free-flowing pellets, which overcomes the feeding issues usually associated with natural fibres (low bulk density). Woodforce is unlikely to cause bridging or funnel-flow/plugging issues. Feeding Woodforce downstream, using a side feeder port, into the molten polymer is recommended (especially with higher melting point thermoplastics) to shorten the Wood Fibre residence time in the extruder and limit the wood fibre thermal degradation. The advantage of this configuration is that the polymer can be aggressively melted, using mixing elements and higher temperatures. While in contrast, after the fibre is introduced, the fibre and the polymer are mixed together using mild dispersive elements and a lower temperature. Спасибо за помощь! |
гуглопереводчик: Рекомендуется подавать Woodforce вниз по течению, используя боковой порт* подачи, в расплавленный полимер * штуцер? |
Просто "боковой питатель" |
You need to be logged in to post in the forum |