DictionaryForumContacts

 natia123

link 7.02.2016 12:33 
Subject: "To contain" "To deliver" gen.
Помогите найти соответствие в русском языке:

To contain. An indication that the measure is adjusted to contain its intended volume when filled from its empty and dry condition at a reference temperature.

To deliver. An indication that the measure is adjusted to deliver its intended volume when filled from its empty and “wet” condition at a reference temperature.

Смысл ясен, но какой русский эквивалент этих терминов?

Заранее спасибо за помощь!

 Linch

link 7.02.2016 12:35 
Cпасибо-то спасибо. А что переводите?

 natia123

link 7.02.2016 12:50 
Руководство по эталонным мерникам.

 Linch

link 7.02.2016 12:55 
Вы очень хитро поступили, вынеся в заглавие этих два глагола. Вроде Вы уже сами объяснения перевели. Вы можете, или Вам их тоже перевести?

 natia123

link 7.02.2016 12:59 
Объяснения переводить мне не нужно. Нужно перевести только сами названия. Одно дело понять этот термин,а другое - найти соответствие в русской технической литературе, чего не могу сделать.

 Linch

link 7.02.2016 13:01 
Так уж и не нужно. Слова, слова... Давайте заболтаем.

 Syrira

link 7.02.2016 13:05 
заливаемый объем, выливаемый объем

 natia123

link 7.02.2016 13:52 
Спасибо.

 johnstephenson

link 7.02.2016 17:09 
natia123: You've left out an important piece of information - that 'To contain' and 'To deliver' appear under a heading 'TERMS USED [in this document]', followed by a definition of each term as it's used in that document:

'Reference temperature': [followed by a definition of it as used in the document]
'Test measure': [ditto]
'To contain': [ditto]
To deliver': [ditto]
'Tolerance (also Maximum Permissible Error)': [ditto]
etc.

If you don't give the context, you can't expect accurate answers.

 johnstephenson

link 7.02.2016 17:28 
.... nor do you mention that the document is called (ie, is about): ‘Specifications and Tolerances for Reference Standards and Field Standards Weights and Measures: Graduated Neck-Type Volumetric Field Standards’ and is by the US National Institute of Standards and Technology. If I can find the information and post it, you can!

 johnstephenson

link 7.02.2016 17:48 

Ignore that second comment, as you did give some of the information, when asked. My first comment stands though.

 

You need to be logged in to post in the forum

Get short URL