2 пункта automat.

[Sr Curioso]

1. Remove all causes.
2. Remove tools from the material.
3. If the material is in touch with tool, take out the material away from the tool
4. Check the tool tips if damage has been occurred.
5. Cut off non finished part.
6. Run the NC program 1 cycle without material.
7. Continue the machining.

Разве п.3 не повторяет п. 2?

[paderin]

2) отводят не сам материал, а инструмент
3) отводят сам материал, не инструмент

[denchik]

Дополняет.
Норм