飞剪(The slab exiting the caster is cut to length by a flying shear and is direct charged into a roller hearth tunnel furnace supplied by Bricmont. 板坯离开连铸机后即由飞剪定尺切割，然后直接装人布里克蒙特公司提供的辊底式隧道炉。)
快速更换中间包(Unlike grade casting may be performed by one of two methods: either a "flying" tundish change, together with a grade separator plate, or a lowered tundish practice and grade separator plate may be used. 异钢种多炉连浇可以采用以下两种方法中的一种进行：采用飞包同时使用钢种隔离板的方法，或者采用降低中间包液位和使用钢种隔离板的方法。)
快速更换中间包(The two most common practices used to minimize the length of the transition bar are flying tundish exchanges and the insertion of separator plates. 将过渡坯长度减少到最短的两个最通常做法是快速更换中间包和插人钢种隔离板。)
