Terms for subject Plastics containing 杆

Chinese	English
一倍半螺纹双槽螺杆	sesqui-threaded double-channel
三段式螺杆挤塑机	three stage screw extruder
上下可移搅拌横杆	crosshead lift
下顶出杆	lower knock-out pin
不等距螺杆	non-constant lead screw
专用螺杆挤塑机	special purpose screw
中空螺杆	neutral screw
中空螺杆	hollow-con screw
主螺杆	main screw
传动螺杆	guide screw
伸缩杆	expanding lever
供料螺杆	stuffing screw
供料螺杆	feeding screw
保险杆杠	bumper beam
保险杆杠汽车	bumper bar
偏心肘杆压机	eccentric toggle lever press
偏心肘杆压机	eccentric toggle press
储料罐推料杆	accumulator plunger
全螺纹螺杆	full flighted screw
全螺纹螺杆长度	enclosed flighted screw length
减距螺杆	decreasing pitch screw
减距螺杆	decreasing lead screw
切杆	cutter bar
制动拉杆	brake bar
制动操纵杆	brake actuating lever
加压控制杆	pressure control lever
加料杆	actuator rod
动态细沟状螺杆	dynamic striation screw
十字杆脱模	crosshead ejection
单杆保险杠	single bar bumper
单头螺纹螺杆	single-thread screw
单头螺纹螺杆	single-flighted screw
单级螺杆	single-stage screw
单螺杆挤塑机	single-screw extruding machine
单螺杆挤塑机	single-screw extruder
单螺纹螺杆	single-flight screw
单螺纹螺杆	single-start screw
单螺纹螺杆型材	single-flight screw profile
单螺纹螺杆型材	single-start screw profile
卸料螺杆	discharge screw
卸料螺杆	delivery screw
压力机横杆	crosshead of the press
压缩螺杆	central spindle
压缩螺杆	compression screw
双头螺杆	two-start screw
双槽螺杆	double channel screw
双波纹螺杆	double wave screw
双流道螺杆挤塑机	two-channel screw extruder
双级螺杆	two-stage screw
双螺杆	twin screw
双螺杆美	twin worm
双螺杆	double screw
双螺杆式反应器	twin screw reactor
双螺杆式混料机	twin screw type compounder
双螺杆挤塑机	twin screw extruder
双螺杆挤塑机美	twin worm extruder
双螺杆挤塑机	twin screw extrusion machine
双螺杆挤塑机	double screw extruder
双螺杆气流干燥器	twin-screw flow dryer
双螺杆混合器	double screw mixer
双螺杆混合机	twin worm mixer
双螺杆进料单螺杆挤塑机	single-screw extruder with double-screw feed
双螺杆进料单螺杆挤塑机	one-and-one-half-screw machine
双螺杆连续捏合混料机	twin-screw kneader and compounder
双螺杆连续捏合混料机	twin screw continuous kneader and compounder
双螺杆连续捏合混料机	twin-screw continuous kneading mixer
双螺槽螺杆	twin-channeled screw
双螺纹喂料的单螺杆挤塑机	single-screw extruder with double-screw feed
双螺纹螺杆	double lead screw
双阶屏障型螺杆	two-stage barrier screw
反方向旋转螺杆	screw rotating in opposite direction
反向旋转啮合式双螺杆挤塑机	intermeshing counter-rotating twin-screws
反向旋转螺杆双螺杆挤塑机	contrarotating screws
反螺纹螺杆	reverse-flighted screw
反转双螺杆挤塑机	counterrotating twin screw extruder
反转螺杆	counterrotating screws
变径螺杆	diameter progressive screw
变距螺杆	variable pitch screw
可伸缩棒杆	telescoping rod
可罗姆博型螺杆双螺杆挤塑	Colombo-type screw
合模拉杆	clamping lever
吊杆传动顶出脱模	hanging bar ejection
吊杆传动顶出系统	hanging bar ejection system
同向旋转啮合式双螺杆挤塑机	intermeshing co-rotating twin-screws
同方向旋转螺杆	screw rotation in the same direction
同轴螺杆式注塑成型机	screw in-line type injection moulding machine
同轴螺杆式注塑成型机	screw in-line type injection molding machine
同轴螺杆预塑化式注塑成型机	coaxial screw preplasticizing injection moulding machine
后拉杆	pull back pin
吹胀杆	inflation mandrel
啮合双螺杆挤塑机	intermeshing twin screw extruder
啮合式供料螺杆	intermeshing feed screw
啮合螺杆	intermeshing screws
啮合螺杆挥发器	intermeshing screw devolatilizer
四螺杆挤塑机	Jumex extruder
四螺杆挤塑机	four-screw extruder
四螺杆捏和混合机	four-screw kneader mixer
四螺杆捏和机	four-screw kneader
四螺杆行星式挤塑机	planetary roller extruder
回程杆	surface pins
回程杆	return pin
固体加工螺杆	solids draining screw
圆头螺杆	round-headed screw
垂直搅拌横杆	crosshead lift
增强保险杆杠	reinforcement bumper
复核杆	check weigher
多头螺纹螺杆	multiple flighted screw
多头螺纹螺杆	multiple thread screw
多头螺纹螺杆美	multi-flighted screw
多段熔融螺杆挤塑机	multi-section melt screw extruder
多段螺杆	multi-zone screw
多级单螺杆挤塑	multistage single-screw extrusion
多级排气式挤塑螺杆	multistage extrusion screw with degassing
多级空心螺杆	multistage core screw
多螺杆	multiscrew
多螺杆挤塑机	multiscrew extruder
多螺杆挤塑机	multiple-screw extruder
多螺杆挤管机	multiscrew pipe extruder
多螺杆管材挤塑机	multiscrew pipe extruder
天线杆电视	aerial mast
定径芯杆吹塑机	calibrator
导杆轨，管	leader
射料杆	ram
射料杆	plunger
射料杆压力	ram pressure
射料杆压力	plunger pressure
射料杆行程	piston travel
射料杆行程	ram travel
射料杆速率度	plunger speed
射料杆面积	plunger face
射料杆驱动油缸	plunger cylinder
屏障型混炼螺杆	barrier type mixing screws
展幅杆	stretch bar
平头螺杆	flat nosed screw
平推顶杆	surface pins
平衡杆涂布机	rocker
开关操纵杆	on-off lever
开模杆	push-back pins
弹性动态无螺杆挤塑机	elastodynamic screwless extruder
往复式单螺杆成型机	reciprocating single-screw machine
往复式螺杆	reciprocating screw
往复式螺杆储料器	reciprocating screw accumulator
往复式螺杆储料器吹塑机	ram screw accumulator
往复式螺杆机组	reciprocating screw unit
往复式螺杆注塑成型	reciprocating screw injection moulding
往复式螺杆注塑成型	reciprocating screw injection molding
往复式螺杆注塑成型机	reciprocating screw injection moulding machine
往复式螺杆注塑成型机	reciprocating screw injection molding machine
往复式螺杆注塑机	reciprocating screw press
往复式螺杆注塑机	reciprocating screw injection machine
往复螺杆吹塑	ram screw
往复进料杆	traversing feed arm
径向螺杆间隙	radial screw clearance
径向螺杆间隙	diametral screw clearance
恒定螺槽深减距螺杆	constant thread decreasing pitch screw
扁顶杆	ejector blade
手动肘杆式压机	hand toggle press
拉杆	pulling lever
拉杆	traverse
拉杆	pull lever
模具拉杆总成	linkage assembly
拉杆距离	tie bar space
拉杆间距	tie bar distance
拉杆间距	daylight between the tie-rods
拉幅杆	stretcher bar
拉幅杆	ajusta-bow
拦杆	hand rail
挡板螺杆注塑机或挤出机	armoured screw
挤压螺杆	tapering screw
挤塑机螺杆	extruder screw
挤塑螺杆	extrusion screw
排气式螺杆	devolatilizing screw
排气式螺杆	vented screw
排气式螺杆	degassing screw
排气式螺杆挤塑机	by-pass extruder
排气往复螺杆式注塑机	vented reciprocating-screw injection machine
排气螺杆式注塑成型	vented screw injection moulding
排气螺杆式注塑成型	vented screw injection molding
推杆式挤出机	plug extruder
推压杆	extrusion plunger
推料杆	pommel
推顶杆	ejector rail
推顶杆法兰	ejector rod flange
推顶横杆	ejection cross bar
推顶连接杆	ejector connecting bar
推顶连接杆	ejection tie bar
推顶连接杆	ejection connecting bar
支承杆	support rod
旁路排气式螺杆	devolatilizing screw with by-pass
无螺杆塑化器	Farrel Diskpack plasticator
无螺杆塑化机	screwless plasticator
无螺杆挤塑机	screwless extruder
无螺杆的	screwless
无计量段螺杆	zero meter screw
曲杆	curved lever
柱塞杆重量	ram weight
柱塞式螺杆储料器	ram screw accumulator
柱塞螺杆	ram screw
柱塞螺杆储料式挤压塑化	ram screw accumulator transfer plasticizing
柱塞螺杆储料式预塑化机	ram screw accumulator preplasticator
柱形螺杆	cylinder screw
梅依尔杆	wire-wound coating rod
槽螺杆顶	fluted screw tip
横杆联轴器	cross staff clutch
横杆锁定	crosshead lock
水冷却螺杆	water cooled screw
沃尔克-斯蒂尔摆杆硬度计	Walke-Steel swing hardness tester
注塑杆注塑机	injection plunger
注塑杆	injection piston
注塑螺杆	injection screw
注射杆回程	injection return stroke
注射杆套	injection sleeve
注射杆行程	injection forward stroke
注料杆注塑机	injection ram
注料杆	shooting piston
注料杆注塑机	injection piston or plunger
注料杆	injection plunger
注料杆	injection piston
注料杆推料体积	volume of stroke
注料杆推料体积	stroke volume
注料杆行程	injection stroke
活动杠杆	live lever
浇道拉出杆	sprue puller
浮动螺杆	floating screw
浸渍芯杆	dipping mandrel
浸渍芯杆吹塑	dipping mandrel blow moulding
深槽螺杆	deep cut screw
深槽螺杆	deep channel screw
深螺槽螺杆	deep cut screw
深螺槽螺杆	deep channel screw
深螺纹啮合螺杆	deep-flight intermeshing screws
深螺纹螺杆	deeply threaded screw
深螺纹螺杆	deep screw
深螺纹螺杆	deep flight worm
混合头螺杆	mixing head screw
混料螺杆	mixing screw
渐变型螺杆	progressive screw
滚动螺杆	rolling screw
焊接工具延伸杆超声波焊接	drift punch
熔体分离型螺杆	melt extractor screw
熔体螺杆挤塑机	melt screw extruder
真正圆锥形的螺杆	truly conical screw
磁盘式无螺杆挤塑料机	Diskpack screwless extruder
磁盘式螺杆	Diskpack screw
立螺杆	central spindle
立螺杆	compression screw
等导程螺杆挤塑机	constant lead screw
等深不等距螺杆	constant depth variable pitch screw
等深螺杆	constant depth screw
等螺槽深度螺杆	screw with constant depth of thread
等螺纹减距螺杆	constant thread decreasing pitch screw
等螺距螺杆	screw with equal pitch
等螺距螺杆	uniform pitch screw
等螺距螺杆	worm of constant pitch
等螺距螺杆挤塑机	constant pitch screw
等螺距螺杆挤塑机	constant land screw
等距变径螺杆挤塑机	constant taper screw
纤维导杆长丝缠绕	fibre delivery arm
线绕涂布杆	wire-wound coating rod
组合式螺杆	modular screw
联杆机构	link mechanism
肘节杆式锁模装置	toggle-lever locking unit
肘节连杆	toggle lever
肘节连杆式压机	toggle press
肘节连杆式压机	toggle lever press
胶凝化螺杆	gelling screw
脱模杆	ejector rail
脱模拉杆架	knockout frame
脱模板拉杆	ejector rod
脱模板拉杆	ejection rod
脱模连接杆	knockout connecting bar
脱模连接杆	ejector connecting bar
脱模连接杆	ejection tie bar
脱模销驱动杆	ejector operating rod
脱模顶杆	stripper bolt
自净式螺杆挤塑机	self-cleaning screw
自动动作装置杆	actuator rod
自动清理螺杆	self-cleaning screw
船杆用漆	spar varnish
莱恩捷刀杆	Lenzing cutting bar
蜗杆挤塑机	worm extruder
蜗杆捏合机带有动蜗杆和固定捏和齿的捏和机	Ko-kneader
蜗杆捏合机带有动蜗杆和固定捏和齿的捏和机	Buss kneader
蜗杆螺纹全长	full flighted length of screw
螺杆	threaded rod
螺蜗杆	worm
螺杆	screw thrust
螺杆一活塞式注塑成型	screw piston injection moulding
螺杆一活塞式注塑成型	screw piston injection molding
螺杆传动功率	screw drive power
螺杆传动轴	screw shaft
螺杆位移	screw displacement
螺杆供料段	feed zone of screw
螺杆冷却	screw cooling
螺杆减速齿轮挤塑机	screw reducing gear
螺杆几何形状	screw geometry
螺杆几何学	geometry of screw
螺杆分配机头	screw die
螺杆前腔	screw antechamber
螺杆传动功率	screw horsepower
螺杆加料器	screw feeder
螺杆加料段	feed section of screw
螺杆和料筒的间隙挤塑机	flight-clearance
螺杆塑化式注塑成型	screw-plasticating injection moulding
螺杆塑化式注塑成型	screw-plasticating injection molding
螺杆增压段	screw restriction section
螺杆外径	outside diameter of a screw
螺杆套筒	screw bushing
螺杆尖端钝化	screw truncation
螺杆尾无螺纹部分	screw shank
螺杆尾密封	screw shank seal
螺杆尾突台	screw hub
螺杆尾突台密封	screw hub seal
螺杆工作间隙	screw working clearance
螺杆工作间隙	screw clearance
螺杆式压铸	screw transfer moulding
螺杆式压铸	screw transfer molding
螺杆式反应器	screw reactor
螺杆式塑化	screw plastification
螺杆式塑化	screw-type plasticizing
螺杆式塑化	screw plasticizing
螺杆式塑化装置注塑机	screw type plasticizing unit
螺杆式塑化装置注塑机	screw type plasticizing equipment
螺杆式塑化装置注塑机	screw plasticizing unit
螺杆式挤出热熔胶涂布机	screw-extrusion hot-melt adhesive applicator
螺杆式挤压机	screw press
螺杆式挤塑机	screw-type extrusion machine
螺杆式挤塑机	screw-type extruder
螺杆式挤塑机	screw extruder
螺杆式柱塞	screw-type plunger
螺杆式柱塞	worm piston
螺杆式柱塞	screw ram
螺杆式模头	worm die
螺杆式模头	screw die
螺杆式注坯吹塑成型法	injection-extrusion blow moulding technique
螺杆式注坯吹塑成型法	injection-extrusion blow molding technique
螺杆式注塑成型	screw injection molding
螺杆式注塑成型	screw injection moulding
螺杆塑化式注塑	injection moulding with screw plasticizing
螺杆塑化式注塑	injection molding with screw plasticizing
螺杆式注塑成型机	screw injection moulding machine
螺杆式注塑成型机	screw injection molding machine
螺杆式注塑成型	injection extrusion moulding
螺杆式注塑成型	injection extrusion molding
螺杆式注塑成型机	screw type injection moulding machine
螺杆式注塑成型机	screw type injection molding machine
螺杆式注塑机	injection extrusion machine
螺杆式注料杆	worm piston
螺杆式活塞	screw plunger
螺杆式活塞	screw piston
螺杆式混合器	screw-type mixer
螺杆式混合器	screw mixer
螺杆式预塑化器	screw preplasticator
螺杆扭矩	torque on screw
螺杆扭矩	screw torque
螺杆挤压塑化	screw transfer plasticizing
螺杆挤塑机	worm extruder
螺杆挤塑机	screw machine
螺杆挤塑机	screw extrusion
螺杆挤料注塑	intrusion
螺杆挤料注塑成型	intrusion moulding
螺杆挤料注塑成型	intrusion molding
螺杆振动运动	oscillating screw motion
螺杆捏合机	screw kneader
螺杆排气口	screw vent
螺杆推力	screw thrust
螺杆推进速度	screw advance speed
螺杆效率	screw efficiency
螺杆旋转	screw turn
螺杆有效长度	effective screw length
螺杆构型	screw configuration
螺杆柱塞式注塑装置	screw ram injection unit
螺杆梢	screwed tip
螺杆梢	screw tip
螺杆段	screw zone
螺杆-活塞体	screw-piston shaft
螺杆-活塞式塑化	screw-piston plasticizing
螺杆混料元件	screw blending element
螺杆清理机	screw cleaning machine
螺杆温度调节	screw heating-cooling
螺杆特性	screw character
螺杆特性曲线	screw characteristic curve
螺杆的计量段	metering section of screw
螺杆的设计	screw design
螺杆的过渡段	transition section of screw
螺杆直径	root diameter plus thread depth
螺杆直径	screw diameter
螺杆直径	diameter of screw
螺杆磨损	screw wear
螺杆背压	screw back pressure
螺杆脱模装置	screw push-out device
螺杆芯孔	screw core
螺杆芯孔塞	screw core plug
螺杆芯孔成型销	screw core pin
螺杆芯孔管	screw core tube
螺杆芯杆	screw stem
螺杆芯杆	screw root
螺杆螺纹	screw flight
螺杆螺纹导程	lead of screw flight
螺杆螺纹总长度	full flighted length of screw
螺杆螺距	worm pitch
螺杆螺距	pitch of spindle
螺杆行程指示器	screw travel indicator
螺杆转数	screw revolution
螺杆转速	screw speed
螺杆转速指示器	screw speed indicator
螺杆转速范围挤塑机	screw speed range
螺杆转速表	screw tachometer
螺杆轴	screw axis
螺杆进料速度注塑时	screw advance speed
螺杆进料速率度	screw feed rate
螺杆速率度	screw speed
螺杆长度	screw length
螺杆长度	length of screw
螺杆间隙	screw clearance
螺杆顶出装置	screw push-out device
螺杆预塑化	screw preplasticization
螺杆预塑化器	screw preplasticizer
螺杆预塑化式注塑成型机	injection moulding machine with screw preplastication
螺杆预塑化式注塑成型	screw preplasticating injection moulding
螺杆预塑化式注塑成型机	screw preplasticating injection moulding machine
螺杆预塑化式注塑成型机	screw preplasticating injection molding machine
螺旋屏障型螺杆	spiral barrier screw
螺旋式螺杆加料器	helical screw feeder
螺槽深度递减螺杆	screw with decreasing thread
螺槽深度递减螺杆	screw with decreasing depth (of thread)
螺纹棱面铠装的螺杆	screw with armoured flight lands
螺距渐减型螺杆	decreasing pitch screw
螺距渐减型螺杆	decreasing lead screw
螺距递减螺杆	screw with decreasing pitch
商行星式螺杆混合机	Vert-o-Mix
行星式螺杆混合机	epicyclic screw mixer
行星螺杆	planetary screws
行星螺杆式挤塑机	planetary screw extruder
计量杆	ratio bar
计量杆	metering rod
计量螺杆	screw feeder
计量螺杆	feeding screw
调幅杆	deckle
调幅杆	deckle rod
调幅杆	cut-off plate
贯穿嵌杆	through-type insert pin
轴向式卸料螺杆	in-line discharge screw
轴向式往复螺杆	in-line reciprocating screw
轴向往复螺杆式注塑机	in-line reciprocating screw injection machine
轴向螺杆	in-line screw
轴向螺杆式塑化器	in-line screw plasticator
轴向螺杆式注塑机	in-line-screw-type injection moulding machine
轴向螺杆式注塑机	in-line screw type injection machine
载荷杆测试	load lever
输送螺杆	conveying screw
返压螺杆	back pressure spindle
进气杆	blowing mandrel
进气杆	core pin
进气杆	core plug
进气杆	blow stick
进气杆	blow pin
连杆合模装置	toggle clamp
连杆式合锁模装置	toggle type mould clamping system
连杆式合锁模装置	toggle type mold clamping system
连杆式系统	toggle system
连杆式锁模装置注塑机	toggle locking system
连接杆	traverse
递减导程螺杆	decreasing lead screw
通用螺杆挤塑机	multi-purpose screw
针杆	pin rod
针杆原纤化	pin rod
针杆原纤化	needle bar
铆钉杆体	rivet shank
锥型双螺杆挤塑机	AGM extruder
锥形双螺杆挤塑机	twin taper screw extruder
锥形双螺杆挤塑机	cotruder
圆锥形螺杆式混合器	epicyclic screw mixer
圆锥形螺杆式混合器	cone and screw mixer
锥形螺杆芯孔	conical core
锥心柱形螺杆	cylinder screw with conical core
锥柱形螺杆	cone-cylinder screw
镶段螺杆	sectional screw
防螺杆反转装置	screw antirotation lock
非啮合式双螺杆挤塑机	non-intermeshing twin screw extruder
非啮合式螺杆	non-intermeshing screws
非往复式挤塑机螺杆	non-reciprocating extruder screw
顶出杆	ejection pin
顶回杆	push-back pins
顶回杆	ejector return pin
顶框导杆	ejector frame guide bar
预塑化螺杆	preplasticizing screw
高产量螺杆	high-performance screw
高性能螺杆	high-performance screw
鱼雷型螺杆	torpedo-type screw
鱼雷头螺杆	torpedo screw