Terms for subject Plastics containing mold

English	Chinese
actual fill time of the mold	模具实际充模时间
actual fill time of the mold	模具填充料实际时间
after mold stress	成型后应力
angle mold	角型模具
at-mold combination	现场配料
automatic mold	自动模具
back-up and mold mounting plate	模板和装模板〈注塑模具〉
balanced mold	对称模槽式模具
blow mold	吹塑模具
blow mold parting line	吹塑模具合模线
blowing in a mold	模具吹塑成型
blowing in a solid mold	固体模具吹塑成型
blowing in a split mold	对开模具吹塑成型
blowing mold	吹塑模具
bottom ram mold	下活塞式模具
brass master mold	黄铜母模
break the mold	开模
breathing mold	开模放气
breathing mold	开模排气
bubble mold cooling	用冷却液冷却模具〈注塑〉
bubbler mold cooling	喷水式塑模冷却
build-up mold	拼合模具
built-up mold	组合模具
button mold	钮扣模具
casting mold	铸塑模具
casting mold	浇铸模具
centre galed mold	中心浇口模具
chamber area of transfer mold	压铸模料腔面积
chill mold	冷铸模
clamp mold	夹固型模具
closed mold	闭合模具
closed mold moulding	闭合模模塑
closure of mold	闭模
closure of mold	合模
composite mold	组合模具
composite mold	多模腔模具
composite mold	什锦模具
compression mold	压塑模具
compression mold	压制模具
compression mold	压缩模具
cored mold	钻孔模具
cored mold	芯塑模
cored-out mold plunger	钻孔模塞
cover mold	固定模注塑模具
cover mold	盖模
cul-cle-sac of mold	模具死区
cup mold	杯状模具
cut-off mold	溢出式塑模
cut-off mold	溢料式模具
die box mold	阴模
dip mold	蘸塑模具
dip mold	浸渍成型模具
dipping mold	浸渍模具
doming mold	凸顶模具
double stacked mold	双层模具
draw mold	薄壁模子
dual cavity mold	双模槽模具
dual plunger mold	双模塞式模具
electroformed mold	电铸模具
epoxy mold	环氧树脂模具
external mold	浸渍模〈外部施胶〉
external mold	外形模具
family mold	成套组件成型模具
family mold	多模腔模具
family mold	套模
female mold	下半模
filling mold speed	充灌模速率度
fixed mold	固定压模
flash mold	溢料式模具
flexible mold	软模具
flexible mold	挠性模
floating chase mold	双阳模和活套的模具
floating chase mold	活模套模具
foamed full mold model	泡沫全模型
foamed in mold	模内发泡
foaming in the mold	模内发泡
foaming mold	发泡模具
form-and mold process	成型模塑法
forming mold	成型模具
French mold	法国式模具〈制备形状不规则或极为精密部件的两瓣模〉
front mold	定模
full mold casting	全模铸塑制品〈模具由上下模构成〉
full mold casting	全模铸塑
full mold process	泡沫塑料实型铸造法〈聚苯乙烯泡沫塑料作铸型的分解铸造法〉
gang mold	多槽模
gang mold	溢料式多槽模具
gang mold	群腔膜
gang mold	成组模
gypsum mold	石膏模
hand lay-up open-mold method	手铺敞模成型法
hand mold	手动模具
hat press mold	帽形压机模具
hinged retraction mold	铰链压模
hinged split mold	铰链式对开模具
hold-down mold	保位槽式模具
hollow mold	敞口模〈铸塑〉
hollow mold	铸模
hollow mold casting	空心模铸塑法
horizontal and vertical flash mold	横向和纵向溢料模〈压模〉
horizontal flash mold	横向溢料模
hot manifold mold	热流道模具〈注塑〉
hot mold	热模
hot runner injection mold	热流道注塑模
hot runner mold	热流道模具〈注塑〉
in-mold decorating	模内装饰
in-mold foiling	模内敷箔
indexing mold	转位模具
indexing mold	旋转式模具
injection mold	注射成型模具
injection mold	注射模具
insulated feed bush mold	流道绝热衬套模具〈注塑模具〉
insulated-runner mold	保温流道型模具
insulated-runner-type mold	保温流道型模具
integral mold	组合模具
internal mold lubricant	内脱模剂
internal mold release agent	内脱模剂
inverted mold	倒模
inverted mold	反模
inverted mold moulding	反模成型
inverted mold moulding	倒模模塑
isolated feed bush mold	绝热流道模具
jet mold	喷射模〈热固性塑料〉
knockout plate mold	有顶出板的模具
landed mold	带台肩式模具
landed mold	半溢料式模具
landed plunger mold	带台肩模塞式模具
landed plunger mold	半防溢式模具
landed positive mold	有肩全压式模具
landed positive mold	半防溢式模具
limit of mold locking force	极限锁模力
loose mold	活动模具
loose mold	可卸式模具
loose mold	移动式模具
loose mold wedge	松配模楔
low pressure mold	低压模具
low pressure sensing mold protection device	低压敏感模具保护装置
low-tempering mold	低温调温模具〈注塑〉
male mold	上半模
master mold	标准模
master mold	母模
match mold thermoforming	对模合模热成型
matched metal mold	对模
matched metal mold	成对金属模
matched mold forming	对模成型
matched-mold thermoforming	合模热成型
matched-mold thermoforming	对模热成型
maximum mold opening	模具最大开距
maximum mold size	模具最大尺寸
metallic mold	金属模具
modular mold	组合模具
mould with injection ram and mold movement along different axis	带有注塑柱塞并沿不同轴向动作的模具
mould with injection ram and mold movement along the same axis	带有注塑柱塞并沿相同轴向动作的模具
moving mold	动模
moving mold blow moulding	动模式吹塑成型
multi-cavity mold	多模腔模具
multicolor injection mold	多色注塑模具
multi-gate mold	多浇口模具
multi-impression mold	群腔模
multi-impression mold	多模腔模具
multiple mold	多腔模具
multi-stacked mold	多层模具
multi-tier injection mold	多层注塑模具
no-mold molding	无模成型
offset transfer mold	侧位压铸模
open face mold	敞口模具
open mold	开放式模具
open-mold process	敞模成型法
original mold	样模
overall mold height	模具最大开距
partitioned mold cooling	塑模间隔冷却
pinpoint gate mold	点浇口模具
plaque mold	成型板模具
plaster mold	石膏模
plug-to-mold clearance	柱模塞间隙
plunger mold	活塞式压铸模具
plunger-type transfer mold	活塞式铸压模
point gate mold	点浇口模具
porous mold	多孔模具
portable mold	移动式模具
portable mold	手提式模具
positive mold	不溢式模具
positive mold	全压式模具
pouring mold	浇注模
precision injection mold	精密注塑模具
press mold	压模
press mold	压塑模具
pressure inside the mold	模内压力
prototype mold	原型模具
prototype mold	试验模具
reentrant mold	凹腔模具
removable tray mold	活板模具
removable wedge mold	活模楔模具
removal from the mold	脱模
removing from the mold	脱模
ridge mold	脊架成型模具
rigid female mold	坚硬阴模
rigid female mold	硬质阴模
ring follower mold	螺纹环模具〈有内螺纹环的模具〉
ring type mold	环状模型
rotary type automatic compression mold-ing press	旋转式自动压缩成型机塑压
round mold insert for marking	标志用圆形模具嵌件
runner mold	无分流道模具
runnerless injection mold	无流道注塑模具
runnerless mold	无流道模具
running-in of molds	模具试运转
sampling mold	试样压模
sandwich mold	夹层材料压塑模具
screw-out-type injection mold	旋拧出式注塑模具〈用于制作螺纹件〉
sectional mold	组合模具
sectional mold	镶合模具
seizing of mold	卡模
seizing of mold	咬模
self-canying mold lubricant	本身含有脱模剂
self-contained mold	整装模具
semi flash mold	半溢料式模具
semi-positive mold	半溢料式模具
semi-positive mold	半全压式模具
separate pot mold	分离料巢式模具
separate pot mold	预塑化槽压铸模
shaping mold surface	成型模面〈模具内壁〉
sheet mold	片材成型模具
shell mold	克罗宁法用模具
shell mold	壳模
shell mold over male mold	阳模制壳模
simplified mold	简易模具
single gate mold	单浇口模具
single parting line mold	单合模线模具
single-cavity conical mold	单模腔锥形模具〈测定材料热变形性能〉
single-cavity cubical mold	单模腔立体模具〈测定材料热变形性能〉
single-cavity mold	单模腔模具
single-impression mold	单型腔模具
single-split mold	简易对分式模具
skeleton mold	骨架成型模具〈吹塑模〉
sliding bed mold	滑座式模具
sliding carriage mold	滑道式模具
sliding core mold	可滑动型芯的吹塑模
sliding mold process	滑动型模具成型法〈挤吹〉
slush mold	搪塑模具
solid female mold	坚硬阴模
solid mold	坚硬模具
solid plate mold	实体板式模具
spacer fork and spring box mold	垫模片和弹簧箱式模具
spiral mold cooling	螺旋式模具冷却
split cavity mold	对开模槽式模具
split chase mold	对开模具
split mold	瓣合式模具
split mold	组合式模具
split mold	对开式模具
split of mold	模瓣
split ring mold	瓣合模圈式模具
split taper mold	瓣合锥度式模具
split wedge mold	瓣合楔式模具
split-follower mold	对开式模具
spray metal mold	喷镀金属的模具
sprayer for mold lubricant	脱模剂用喷雾器
sprayer for mold lubricant	喷润滑模剂用的喷雾器
spring box mold	弹簧箱式模具
sprueless mold	无流道模具
sprueless mold	无注口料式模具
square box mold	正方箱式模具
square box mold	方箱式模具
stack mold	叠模压塑模具
stacked injection molds	多层注塑模具
stamping mold	冲压模
standard mold frame	标准模架
steam heated mold	蒸汽加热式模具
steam jacketed mold	蒸汽夹套模
steam-cored mold	蒸汽通道式模具
steam-cored mold	蒸汽加热式模具
stepped cavity mold	阶梯模腔式模具
sticking in the mold	黏模
sticking to mold	黏模
straight hydraulic mold clamping system	直压式合模装置
straight hydraulic mold clamping system	全液压合锁模装置
stripper mold	脱模板式模具
stripper plate mold	碰板式模具
stripper plate mold	脱模板式模具
stripping from the mold	脱模
stripping of mold	脱模
subcavity gang mold	多模槽式模具
subcavity mold	溢料式多槽模具
subcavity mold	多模槽式模具
suction mold	真空成型
swing mold	转动式模具
tandem transfer mold	积层式传递模具
test mold	试验用模具
thermoforming mold	热成型模具
three-plate injection mold	三板式注塑模具
three-plate mold	三板式模具
toggle type mold clamping system	连杆式合锁模装置
toggle type mold clamping system	肘节式合模装置
top force mold	祷塑压模
top knockout mold	上脱模式模具
transfer mold	压铸成型模具
tube mold	吹管模
twin mold	双槽模具
two-level mold	双层模具
two-plate mold	双板模具
two-stage mold	双级模具
ultrasonic-formed mold cavity	超声波成型模腔
unit mold	标准模具〈可互换内嵌件的模具〉
unit mold	组合模具
unit-construction mold	组合结构式模具
unit-type mold	单元式模具
universal mold	通用模具〈模座尺寸一定，而模槽或模芯可互换〉
unsaturated polyester-based wet dough mold-ing compounds	不饱和聚酯湿料团模塑料
unscrewing mold	旋松式模具
upper part of a mold	模具上部
upper part of a mold	阳模
upper part of a mold	上模
vacuum forming into a female mold	阴模真空成型
vacuum forming over a male mold	阳模真空成型
valve-gating mold	阀控浇口式模具
V-bar mold	V形镶条模具
vertical flash mold	立式溢料式模具
volumetric mold shrinkage	体积模压收缩
wedge-type mold	楔型模具
wedge-type mold clamping system	楔型模具锁模装置系统
withdrawing from the mold	脱模