| English | Chinese |
| AС current | 交流电流 |
| a polyurethane rubber type | 一种聚氨酯橡胶类 |
| A-stage | A-阶段 |
| A-stage | 可溶可熔阶段〈酚醛树脂〉 |
| A-stage | 甲阶段 |
| A-stage resin | 可溶可熔酚醛树脂 |
| A-stage resin | 甲阶酚醛树脂 |
| A-type calender | 三角形三辊压延机 |
| A-type calender | A型压延机 |
| activity of a catalyst | 催化剂活性 |
| arching of a roll | 辊中高 |
| arching of a roll | 辊外凸 |
| area of the surface exposed to a catalyst | ―种催化剂的有效表面积 |
| bakelite A | 可溶可熔酚醛树脂 |
| bisphenol A based epoxy resin | 双酚 A 型环氧树脂 |
| bisphenol A containing pendant group epoxy resins | 双酚 A 侧链型环氧树脂 |
| bisphenol A diglycidyl ether | 双酚 A 二缩水甘油醚 |
| bisphenol A disalicylate | 双水杨酸双酣 A 酯〈紫外线吸收剂〉 |
| bisphenol A epoxy resin | 双酚 A 型环氧树脂 |
| bisphenol A polycarbonate | 双酣 A 型聚碳酸酯 |
| blowing in a mold | 模具吹塑成型 |
| blowing in a mould | 模具吹塑成型 |
| blowing in a single-piece mould | 整体模具吹塑成型 |
| blowing in a solid mold | 固体模具吹塑成型 |
| blowing in a solid mould | 固体模具吹塑成型 |
| blowing in a split mold | 对开模具吹塑成型 |
| blowing in a split mould | 对开模具吹塑成型 |
| blowing into a mould | 有模具吹塑成型 |
| blowing of a hot-injected preform | 热注塑型坯吹塑 |
| blowing with a rubber blanket | 用橡胶垫气胀成型 |
| bowl of a calendar | 压延机压辊 |
| capacitance of a capacitor | 电容器容量 |
| clearance of a gear | 齿距 |
| clearance of a press | 模压机开程［距］ |
| clearance of a screw | 螺纹间距 |
| cleavage in a test specimen | 试桦劈裂 |
| cleavage in a test specimen | ［wedge-type kerf］楔形劈裂 |
| component of a formulation | 配方组分 |
| component of a yarn | 纱线组分 |
| compression of a spring | 弹簧压紧 |
| covering a roll with rubber | 涂层橡胶辊 |
| cracking of a film | 涂膜层开裂 |
| depth of a thread | 螺纹深度 |
| diglycidyl ether of bisphenol A | 双酚 A 二缩水甘油醚 |
| direction A and B | 纵向和横向层压塑料 |
| elastomeric copolymer from acrylonitrile, butadiene and a carboxylic group containing monomer | 丙烯月青-丁二烯和一个含羧基单体的共聚弹性体 |
| elastomeric copolymer from acrylonitrile, butadiene, styrene and a carboxylic group containing monomer | 丙烯腈-丁二烯-苯乙烯和一个含羧基单体的共聚弹性体 |
| elastomeric copolymer from styrene, butadiene and a carboxylic group containing monomer | 苯乙烯-丁二烯和一个含羧基单体的共聚弹性体 |
| expanding mill of a hot injected blank | 热注塑型坯的膨胀 |
| expanding mill of a hot injected preform | 热注塑型坯的膨胀 |
| form of a thread | 螺纹牙形 |
| form of a thread | 螺纹断面形状 |
| formation of a gel | 凝胶形成 |
| forming of a blank | 毛坯成型 |
| freezing of a melt | 熔体凝固 |
| freezing of a melt | 熔体固化 |
| 1,4,5,6,7,8,8-heptachloro-3a,4,7,7a-tetrahydro-4,7-methanoindene | 1,4,5,6,7,8,8-七氯-3a,4,7,7a-四氢-4,7-亚甲基茚防白蚁剂 |
| hydrogenated bisphenol A diglycidylether | 氢化双酚A 二缩水甘油醚 |
| hydrogenated bisphenol A epoxy resin | 氢化双酚 A型环氧树脂 |
| hydroxymethyl bisphenol A diglycidyl ether | 羟甲基双酚 A 二缩水甘油醚 |
| hydroxymethyl bisphenol A epoxy resin | 羟甲基双酚A环氧树脂 |
| intensity of a chemical reaction | 化学反应强烈 |
| layer of adhesive in a joint | 粘接胶合层 |
| lining of a pipe | 管衬里 |
| locate a flaw | 确定缺陷位置 |
| lower part of a mould | 下模塞〈压塑〉 |
| offset needles on a roller | 辊上偏位针 |
| outside diameter of a screw | 螺杆外径 |
| plane of a laminate | 层压面 |
| polished to a mirror finish | 镜面光泽 |
| polycarbonate of halogenated bisphenol A type | 双酚A型卤代聚碳酸酯 |
| p,p'-bisphenyl phenol A | 4,4'-双苯基酚 A |
| reducing power of a white pigment | 白颜料掩盖力 |
| reentrant base of a bottle | 凹状瓶底 |
| releasing a vacuum | 停止真空 |
| releasing a vacuum | 解除真空 |
| root of a tooth | 齿根 |
| running a blank | 空白试验 |
| solidification of a melt | 熔体凝固 |
| solidification of a melt | 熔体固化 |
| strength of a dye | 染料着色力 |
| stroke of a piston | 活塞冲程 |
| stroke of a screw | 螺旋动程 |
| tetrabromobisphenol A | 四溴双酚 A 〈阻燃剂〉 |
| tetrabromobisphenol A allylether | 四溴双酚 A 烯丙基醚〈阻燃剂〉 |
| tetrabromobisphenol A bis2-hydroxy ethyl ether | 四溴双酚 A 双2-溴乙氧基醚阻燃剂 |
| tetrabromobisphenol A bis2,3-dibromopropyl ether | 四溴双酚 A 双2,3-二溴丙基醚阻燃剂 |
| tetrachlorobisphenol A | 四氯双酚 A〈阻燃剂〉 |
| thermoplastic blend of a copolymer from acrylonitrile and styrene with chlorinated polyethylene | 丙烯月青-苯乙烯共聚物与氯化聚乙烯的热塑性共混物 |
| tray of a column | 塔板 |
| tray of a column | 塔盘 |
| unsaturated polyester resin of bisphenol A and p-phthalic acid types | 双酣 A 与对苯二甲酸混合改性型不饱和聚酯树脂 |
| unsaturated polyester resin of bisphenol A types | 双酚 A 型不饱和聚酯树脂 |
| upper part of a mold | 模具上部 |
| upper part of a mold | 阳模 |
| upper part of a mold | 上模 |
| upper part of a mould | 模具上部 |
| upper part of a mould | 阳模 |
| upper part of a mould | 上模 |
| vacuum forming into a female mold | 阴模真空成型 |
| vacuum forming into a female mould | 阴模真空成型 |
| vacuum forming over a male mold | 阳模真空成型 |
| vacuum forming over a male mould | 阳模真空成型 |
| volume of a batch | 批量大小 |
