Terms for subject Plastics containing Cold

English	Chinese
cold adhesive	冷黏合剂
cold bend	耐冷弯曲
cold bend strength	耐低温弯曲强度
cold bend strength	耐冷弯曲强度
cold bend temperature	低温揉曲温度
cold bend test	低温弯曲试验
cold bending	冷弯曲
cold calendering	常温压延
cold casting	冷浇铸
cold charge	低温装料
cold check resistance	耐冷开裂
cold crack	冷裂纹
cold crack resistance temperature	耐低温开裂温度
cold crack temperature	低温开裂温度
cold cure	冷熟化
cold cure	冷固化
cold cure moulding	常温熟化成型
cold cure urethane	常温熟化聚氨酯
cold curing	冷熟化
cold curing	冷固化
cold-curing flexible foam	冷固化软泡沫塑料
cold-curing foam	冷发泡泡沫塑料
cold-curing foam	冷固化泡沫塑料
cold cut	冷切造粒
cold cut varnish	冷配清漆
cold dipping	冷蘸涂
cold dipping	冷醮浸
cold draw	冷拉伸
cold draw effect	冷拉效应
cold drawability	冷拉伸性
cold drawing	冷牵伸
cold drawn	冷拉伸
cold exchanger	冷却器
cold exchanger	冷交换器
cold flexibility	低温挠曲性
cold foam	冷发泡泡沫塑料
cold formable laminating	可冷成型层压材料
cold forming	冷成型塑料
cold gluing	冷粘接
cold hardening	冷硬化
cold hobbing	冷切压
cold injection	冷注塑发泡
cold lamination	常温层压
cold lamination	冷层压
cold molding	冷成型
cold molding	冷压模塑
cold molding compound	冷压模塑料
cold molding material	冷压模塑料
cold moulding	冷成型
cold moulding	冷压模塑
cold moulding compound	冷压模塑料
cold moulding material	冷压模塑料
cold orientation	冷拉伸
cold orientation	冷取向
cold parison	冷坯吹塑
cold parison blow moulding	冷坯吹塑法
cold parison process	冷坯吹塑法
cold performance test	低温性能试验
cold plastication	低温塑炼
cold plasticity	低温塑性
cold point	冻点
cold polymer	低温聚合物
cold press	冷层压
cold press	冷压粘接
cold-press moulding	冷压模塑
cold pressing	冷压合
cold-pressing adhesive	冷压黏合剂
cold proof	耐寒的
cold refinement	冷精加工
cold refinement	冷精炼
cold refining	冷精加工
cold refining	冷精炼
cold resistance	防冻性
cold-resistant	抗冻的
cold-resistant	耐寒的
cold-resisting property	耐寒性
cold roll-forming	冷辊压成型
cold rolling	冷辊压成型
cold runner mould	冷流道模具注塑
cold saturated	冷饱和的
cold-seal adhesive	冷封闭黏合剂
cold-seal adhesive	冷封闭剂
cold seal paper	冷封合纸
cold setting	常温固化
cold setting adhesive	常温固化黏合剂
cold setting adhesive	冷固化黏合剂
cold setting binder	常温固化粘结剂
cold setting binder	冷固化粘结剂
cold setting foundery mould binder	冷固化型铸模粘结剂
cold setting glue	常温固化胶
cold setting glue	冷固化胶黏剂
cold setting lacquer	常温固化漆
cold setting resin	常温固化树脂
cold setting temperature	冷固化温度
cold shaping	冷成型塑料
cold shots cold slugs	不均匀进料时模压缺陷
cold slug	冷料头注塑时
cold slug	早冷料
cold slug well	冷料槽
cold slug well	冷料井
cold slugs	不均匀进料时模压缺陷
cold spots	冷疤
cold spray	常温喷涂
cold spreading	常温涂敷黏合剂
cold stain	冷变形
cold stamping	常温成型
cold start protection	冷起动保护用于塑化螺旋推进器
cold state	冷状态塑料
cold tapping	冷攻螺纹
cold vulcanization	冷硫化橡胶用黏合剂
cold-water-waxing	冷水涂蜡
cold-water-waxing	冷水上蜡
cold well	冷料槽
cold well	冷料井
cold working	冷加工塑料
defect-cold shots	不均匀进料时模压缺陷
high resiliency cold cured polyurethane flexible foams	高回弹冷熟化聚氨酯软质泡沫塑料
high speed cold forming	高速冷成型
resistance to cold and tropic conditions	耐寒冷和耐热带气候性