Terms for subject Drilling containing 磨

Chinese	English
一面磨光修整或加工过的	surfaced or dressed one side
不均匀磨损	irregular wear
两面磨光修整或加工过的	surfaced or dressed two sides
中研磨性岩石，岩层	medium abrasive rocks, formation
事故处理磨铣	emergency milling-up
事故处理磨铣	emergency-milling out
井下磨鞋	down-hole mill
井底落物凹面磨鞋	concave bottom junk mill
使用磨损	worn out in service
保径齿外侧耐磨面	gauge-wearing surface
保径齿外侧耐磨面	gauge-cutting surface
保径齿耐磨表面	gage-wearing surface
保护性防磨衬管	scab liner
保护性防磨衬管	isolation liner
修磨	resharpen
套管开窗用修边磨鞋	string mill
偏磨	lopsided wear
偏磨	eccentric wear
允许磨损量	wear allowance
减磨轴承	antifriction bearing
切屑刃磨损度	cutting structure dullness
刮刀钻头刀刃磨损成指状	fingering
钻杆加厚部分磨损区	upset run out zone
另一端磨铳的	milled other end
可磨铣掉的	millable
可换磨损块式稳定器	replaceable wear pad stabilizer
可换磨损块的稳定器	replaceable wear pad stabilizer
四面磨光修整或加工过的	surfaced or dressed four sides
圆形修磨	round off
地层研磨性系数	factor of formation abrasiveness
外径磨损	out of gage
外径无磨损	in gage
套管磨铣工具	section mill cutter
套管开窗用的起始磨鞋	starter mill
封隔器磨铣工具组合	packer milling assembly
尺寸磨小的	loss of gauge
尺寸磨小的钻头	out of gauge bit
尺寸磨小的钻头	losing gauge bit
岩心磨损	core grinding
岩心研磨	core grinding
已磨损的镶齿	worn insert
带导向头的磨鞋	pilot mill
带抗磨垫的稳定器	wear pad stabilizer
带缘磨鞋	skirted mill
带裙状引鞋的磨鞋	skirted junk mill
平底磨鞋	junk mill
平底磨鞋	flat bottom mill
开窗磨铳	window milling
弹性修磨工具	spring-loaded dressing tool
钻头径向磨损	gauge wear
钻头径向磨损	gauge loss
快速磨铳	speed mill
打磨	snag
打磨器	dresser
抗磨力	abrasive resistance (同 abrasive hardness)
抗磨垫	wear pad
抗磨性	abrasive resistance (同 abrasive hardness)
抗磨添加剂	antiwear additive
抗磨蚀性	abrasive resistance (同 abrasive hardness)
折磨	grind
按磨损情况进行调整	adjust for wear
接头磨损	whiplash
新钻头磨合期	bit break-in procedure
无磨损	in-gage
早期磨损	undue wear
易磨损件	wearing parts
易磨损表面硬化	hard banding
易磨损表面硬化	hard facing
易偏磨钻头的砂岩	hillside sand
有磨蚀性的	abrasive
未加焊抗磨圈的接头	unprotected tool joint
钻头正常磨损	chipping type wear
泥浆减磨剂	borehole lubricant
洗井磨鞋	clean-out mill
直径磨小的岩心	undersize core
研磨	mill
研磨'性	abrasiveness
研磨性地层	abrasive formations
研磨性地层	abrasive formation
研磨料	abrasive
研磨的	ground
研磨磨损	abrasive wear
研磨钢砂钻头	drag shoe
硬质合金磨鞋	carbide mill
磨光	tumble
磨光	wear out
磨光	hone
磨合	running-in wear
磨合	run-in
磨合	break in
磨坏	wear out
磨坏的	worn out
磨坏的	outworn
磨坏的丝扣	galled thread
磨坏的螺纹	galled threads
磨坏的钻头	dulls
磨平毛口	debur
磨平的	worn flat
磨损	rub
磨损	scuff
磨损	rubbing wear
磨损	fret
磨损	battering
磨损到小于标准尺寸	wear out of gauge
磨损：可换的稳定器	replaceable wear pad stabilizer
磨损失效期	wearout failure period
磨损平面	wearflat
岩心的磨损平面	face machined flat
磨损深度	abraded depth
磨损痕迹	abrasion mark
磨损的	worn out
磨损的牙轮齿	worn teeth
磨损的转盘	worn rotary table
磨损螺纹	galled thread
磨损表面	abrasive surface
磨损表面	abrasion surface
钻头磨损速度	rate of dulling
磨掉	abrasion
磨料喷嘴	abrasive jets
磨料喷射钻头	abrasive jet bit
磨石	rubber
磨碎	pulverize
磨碎	triturate
磨碎	powder
磨碎的	pulverized
磨细	grinding
磨耗	abrade
磨蚀	fretting corrosion
磨蚀	galling
链条磨蚀	brinelling
磨蚀喷射钻井	abrasive jet drilling
磨钝的钻头	dull bit
磨钝的钻头	dulled bit
磨钝的钻头	blunt bit
磨铣	milling up
磨铣	mill
磨铣井底金属落物	mill on junk
磨铣作业	milling operation
磨铣套管内壁的结垢	mill scale
磨铣工具	milling tool
磨铳处理事故	emergence milling out
磨铳掉井内金属落物	milling up junk in the hole
磨铳的	milled
磨鞋	rotary shoe
磨鞋	mill type shoe
等磨损准则钻头设计	equal wear criterion
泵缸套磨损	barrel wear
耐磨'性	wearing quality
耐磨性	wear
耐磨的	wear resistant
耐磨的	anti-abrasive
耐磨补心	wear bushing
钻头自锐式磨损	chipping type wear
螺纹顶磨尖的丝扣	sharp thread
螺纹顶磨尖的丝扣	crested thread
补焊钻杆接头防磨护圈	rebanding
表面磨损的金刚石	abraded diamond
西瓜皮磨鞋	watermelon mill
套管开窗修边西瓜皮磨鞋	water melon mill
轴承减磨合金	soft metal
过度磨损	undue wear
过度磨损的镶齿	excessively worn insert
重复研磨的岩屑	reground cuttings
金刚石磨鞋	diamond mill
金属表面磨损	hone
钢丝绳磨损	wireline wear
钢齿磨损	worn teeth
钻头磨损分级	bit wear grading
钻头磨损分级	bit dull grading
钻头磨损情况	dull condition of the bit
钻头磨损校正后的 D 指数	D-exponents corrected by bit-wear
钻头中心磨空	cored
钻头偏磨	mule foot a bit
钻头牙齿磨损程度	bit tooth dullness
钻头被落物磨损	junk damage
钻头还未磨损或磨损不严重就起出	pull it green
钻头齿尖的槽形磨损	cupping
钻头齿顶磨损	flat crested wear
钻杆磨损	rod wear
钻杆磨鞋	drill pipe mill
钻杆对套管的磨削	rod cutting
钻杆接头硬合金抗磨圈	tool joint hard band
钻杆母接头坐吊卡的台肩端面磨损	undercut
钻铤磨鞋	drill collar mill
防磨合金	antifriction alloy
防磨垫	wear pad
防磨套	wear bushing
钻杆接头防磨焊圈	banding
防磨补心	wear bushing
阶梯式磨损	step-type wear
陶瓷耐磨套	ceramic wear sleeve
面磨光	slickensiding
齿磨平的钻头	smooth-mouthed
齿上磨出的深痕	tracking teeth
齿尖磨平处	tooth flat