Terms containing 检孔

Subject	Chinese	English
tech.	下水道检査孔	sewer manhole
el.	中心孔检测	center aperture detection
el.	中心孔检测磁超分辨技术	center aperture detection magnetic superresolution technology
met.	内孔检査镜	introscope
met.	内孔检视仪	introscope
tech.	内孔检视仪	borescope
met.	内孔窥视仪检查	borescope inspection
auto.	内孔表面光学孔径检查仪	boroscope
gen.	内孔表面〔光学孔径，光学缺陷〕 检査仪	boroscope
oil	内孔表面检查仪	boroscope
el.	前孔检测	front aperture detection
el.	前孔检测磁超分辨率技术	front aperture detection magnetic superresolution technology
auto.	加液和检查孔	level filler
dril.	泥浆泵十字头检查孔盖	crosshead inspection plate
eng.geol.	升孔法检修	up-hole shooting
el., mech.	压接检查孔	crimp inspection hole
met.	双孔和无孔检测	double-punch and blank column detection
tech.	双孔和无孔检测	double punch and blank-column detection
space	发射筒检查孔盖	manhole cover of launch tube
eng.geol.	取芯检查孔	cored verification hole
tech.	同位穿孔检验	batten check
el.	后孔检测	rear aperture detection
el.	后孔检测磁超分辨率技术	rear aperture detection magnetic superresolution technology
tech.	圆形检查孔	round manway
tech.	圆形检查孔	round manhole
tech.	地下电缆检修孔	cable vault
avia.	大孔径地震检波器组合	large-aperture seismic array
eng.geol.	孔内检查	downhole inspection
tech.	孔数检验	hole count check
met.	孔率检验器	porosity tester
gen.	孔隙检测仪	poroscope
met.	孔隙检验	porosity test
tech.	孔隙率检查	porosity inspection
el.	安全壳设备检查孔【核】	containment equipment hatch
tech.	小型检查孔	hand hole
tech.	屋顶检查孔	inspection hole on roof
tech.	微孔检测器	pin-hole detector
tech.	悬挂装置检査孔	suspension access
auto.	悬架检视孔	suspension access
plast.surg.	打孔钻取活组织检查	punch biopsy
met.	拉丝模孔检查仪	wire-drawing die profile meter
met.	拉丝模模孔检査仪	wire-drawing die profilometer
tech.	拉模孔光洁度光学检查仪	profiloscope
gen.	拉模孔粗糙度光学检査仪	profilosecope
tech.	排气压力检査孔	inspection hole for exhaust gas pressure
el.	接触件检查孔	contact inspection hole
auto.	曲轴箱检查孔盖	crankcase door
auto.	曲轴箱检查孔盖	crankcase inspection cover
shipb.	曲轴箱检查孔盖	crank case inspection hole cover
tech.	有检查孔的管道	pipe with access eye
tech.	格孔检查	checkering test
hydroel.st.	桨叶检修孔	blade removal opening
archit.	检窥视孔	eye hole
auto.	检修维护，操作孔	service hole
auto.	检修査孔	manhole
archit.	检修装配，注人孔	hand hole
archit.	检修査孔	access opening
auto.	检修视孔	access opening
tech.	检修人孔	maintenance manhole
el.	检修人孔	access port
tech.	检修人孔	inspection manhole
tech.	检修孔	maintenance manhole
tech.	检修孔	inlet manhole
archit.	检修孔	control ling manhole
met.	检修孔	access hole
el.mach.	检修孔	overhaul hatch
met.	检修孔	access door
wind.	检修孔	access
wind.	检修孔	manhole
wind.	检修孔	access opening
railw.	检修孔	inspection hole
railw.	检修孔	manway
chem.	检修孔	accessing opening
tech.	检修孔	control manhole
auto.	检修孔	hand hole
auto.	制动器检修孔	access slot
auto.	检修孔口	access opening
auto.	检修孔口	access fitting
refrig.	检修孔	access port
auto.	检修孔盖板	service hole cover
tech.	检修孔盖	access door
tech.	检修孔盖板	access plate
tech.	检修窗孔	service port
tech.	检孔	verify
tech.	检孔机	verifier
met.	检孔镜	boroscope
met.	用检孔镜目视检查	boroscope examination
el.	检察孔	inspection hole
oil, transp.	检查【修】孔	access hole
el.	检查钻孔	inspection bore-hole
oil	检查人孔	inspection manhole
space	检查孔	manhole
hydroel.st.	检查孔	inspection hole
hydroel.st.	检查孔	inspection borehole
hydroel.st.	检查孔	sight hole
space	检查孔	sight port
eng.geol.	检查孔	cleanout
eng.geol.	检查孔	check hole
space	检查孔	access hole
space	检查孔	porthole
space	检查孔	access opening
tech.	检查孔	disconnecting manhole
gen.	检查孔	crawlway
tech.	检查孔	inspection eye
met.	检查孔	access eye
tech.	检查孔	inspection manhole
tech.	检查孔	inspection shaft
tech.	检查孔	observation hole
tech.	检查孔	access door
tech.	检查孔	sighting hole
tech.	检查孔	inspection port
el.	检查孔	inspection window
el.	检查孔	viewport
oil	检查孔	inspection opening
bridg.constr.	检查孔	man hole
bridg.constr.	检查孔	inspecting hole
oil	检查孔	inspection door
el.	检查孔	hand hole
dril.	检查孔	peep hole
tech.	检查孔	inspection fitting (板)
tech.	检查孔	inspecting shaft
auto.	检查孔供观察和检査用的开口	inspection opening
tech.	检查孔	inspecting port
gen.	检查孔	drop manhole
dril.	检查孔丝堵	opening check plug
tech.	检查孔塞	inspection plug
tech.	检查孔套管	manhole junction box
tech.	检查孔数	number of checking hole of grouting
tech.	检查孔板	inspection plate
tech.	检查孔板	inspection cover
tech.	检查孔盖	inspection plate (板)
tech.	检查孔盖	inspection hole cover
tech.	检查孔盖	manhole plate
oil	检查孔盖	inspection plate
oil	检查孔盖	inspection cover
tech.	检查孔盖	handhole cover
dril.	检查孔盖板	inspection plate
tech.	检查孔盖板	inspection hole flag
tech.	检查孔盖板	access plate
expl.	检查炮孔	checking the borehole
tech.	检查用手孔门	handhole door for inspection
tech.	检查视孔	inspection peep hole
tech.	检查钻孔	inspection borehole
tech.	检查钻孔	inspection hole
tech.	检查钻孔	examination borehole
tech.	检查钻孔	examination hole
met.	检查钻石拉模孔几何形状用显微镜	diamond die microscope
archit.	检査门孔	inspection door
archit.	检査手孔盖	hand hole cover
met.	检査人孔	inspection manhole
tech.	检査孔	handhole
tech.	检査孔	inspecting eye
archit.	检査孔	man hole
archit.	检査孔	inspecting hole
archit.	检査孔口	access hatch
tech.	检査孔	sight hole
chem.	检査孔	inspection opening
refrig.	检査孔	access eye
skydive.	检査孔	crawlway
el.	检査孔	trap door
archit.	检査孔门	inspection door
met.	检査孔	inspection port
met.	检査孔	manhole
wind.	检査孔	access hole
wind.	检査孔	inspection hole
wind.	检査孔	access hatch
archit.	检査孔口	inspection eye
archit.	检査孔	manway (井)
avia.	检査孔	porthole
earth.sc.	检査孔染料注入	manhole dye injection
met.	检査孔盖	inspection cover
tech.	检査用手孔门	handhole door
met.	检査筛孔尺寸	mesh size of scalping screen
el.	检测孔	access hole
oil	检漏孔	bar hole
agric.	检视孔	peep hole
tech.	检视孔	eye hole
auto.	检视孔	access opening
auto.	检视孔	eyelet
agric.	检视孔	inspection door
agric.	检视孔	peephole
busin.	检视孔	sight hole
agric.	检视孔	test frame
nautic., tech.	检视孔	sight opening
auto.	检视孔塞	sight plug
auto.	检视孔玻璃	sight glass
telecom.	检验孔	inspection hole
geophys.	检验穿孔	verifying punch
tech.	模孔光学检查仪	profiloscope
met.	模孔光学检査仪	profiloscope
met.	模孔轮廓光学检查仪	profiloscope
auto.	正时标记检视孔	timing hole
gen.	毛孔印记检査法	poroscopy
tech.	气孔检验	Porosity test
shipb.	水平检查孔指示器	water sight level indicator
gen.	汗孔检视法	poroscopy
tech.	污水管检査孔	sewer manhole
auto.	自动变速器油压检査孔塞	pressure tap
hydroel.st.	浆叶检修孔	blade removal opening
tech.	测视孔检修孔	inspection hole
tech.	潜望镜检查钻孔	periscopic inspection of drill holes
tech.	炉内检视孔	spare nozzle for furnace inspection
tech.	玻璃检视孔	glass peep hole
IT	电刷穿孔比较检査	brush-compare check
tech.	相同位穿孔检查	peek-a-boo check
gen.	瞳孔检影法	koroscopy
gen.	瞳孔检影法	coroscopy
auto.	离合器检查孔	clutch inspection hole
agric.	穿孔卡片检索法	paramount sorting system
agric.	穿孔卡片检索表	multiple entry card key
tech.	管道检查孔	access eye
tech.	纸卡检孔机	card verifier
tech.	绝缘检漏孔	insulating locator
tech.	绝缘检漏孔	holiday locator
telecom.	缺陷小孔检査器	pinhole detector
tech.	舵检修孔	access hole of rudder
tech.	螺纹检查孔	threaded inspection opening
tech.	观察检验孔	look box
el.	触头检査孔	contact inspection hole
tech.	计孔检验	hole count check
met.	金属镀层孔隙度电图检查	electrographic test
telecom.	针孔检查器	pinhole detector
tech.	针孔检测仪	holiday detector
met.	针孔缺陷光电无损检测仪	photoelectric pinhole detector (带材的)
tech.	钢板压制的检查孔盖	pressed steel manway cover
tech.	钢板压制的检查孔盖	pressed steel manhole cover
tech.	钴孔直线度检查	straight hole test (人工偏斜前)
tech.	钻孔下潜望检视	periscopic inspection of drill holes
eng.geol.	钻孔垂直度检测	bored hole verticality measurement
tech.	钻孔壁的物理检验	physical logging
eng.geol.	钻孔孔壁检查镜	borescope
tech.	钻孔摄影检查	borehole camera inspection
eng.geol.	钻孔检查显示器	borescope
tech.	钻孔潜望镜检查	periscopic inspection of drill holes
eng.geol.	钻孔直径检测	bored hole diameter measurement
el.	键盘检孔机	keyboard verifier
tech.	键盘式卡片检孔机	key card verifier
space	键盘纸带穿孔机和检验器	keyboard paper tape punch and verifier
met.	镗孔内壁检验器	bore wall tester
shipb.	镗孔前检查轴系中心线定位	check center line positioning for shaft system before boring
shipb.	镗孔前检查轴系中心线定位	check center-line positioning for shaft system before boring
shipb.	镗孔前检查轴舵系中心线定位	inspecting center line positioning for shaft and rudder system before boring
shipb.	镗孔前检查轴舵系中心线定位	inspecting center-line positioning for shaft and rudder system before boring
shipb.	镗孔后检查轴系光学校中	optical aligned check for shaft system after boring
shipb.	镗孔后检查轴系光学校中	inspecting optical alignment for shaft system after boring
tech.	顶棚检查孔	ceiling manhole
tech.	顶棚检查孔	inspection hole of ceiling
tech.	顶棚检查孔	ceiling inspection hole
tech.	顶棚检査孔	inspection hole of ceiling
refrig.	风管检査孔	inspection hole in duct