Terms for subject Plastics containing on

English	Chinese
adhesive spread on adherend	涂布黏合
backing plate on ejection side	顶出侧上的模板
backing plate on the feed side	喂料侧模板〈注塑模具〉
bolt on	上紧螺栓
bolt on nozzle	上紧螺栓喷嘴
clip-on gage	夹具测量仪
clip-on gauge	夹具测量仪
color retention on exposure to hydrosulfide	耐氢硫化物保色性
colour retention on exposure to hydrosulfide	耐氢硫化物保色性
contingent on application	取决于应用
creep-depending-on-time compression test under heat	受热条件下蠕变与压缩试验时间相关塑料
demand on the dimensional stability	对尺寸稳定性的要求
ejector on nozzle side	注料嘴侧脱模销
epoxy resin based on diphenylol propane	双酚 A型环氧树脂
follow-on device	连续装置
follow-on tool	导向连续冲割模
follow-on unit	连续装置
follow-on unit	按续的装置
grafting on surface	表面接枝
hour on stream	操作时间
knife-on-blanket coating	垫带式刮刀涂布
knife-on-roll coating	辊式刮刀涂布
layer-on-layer foaming	层-层发泡
loss in weight on drying	干燥失重
loss on heating	干燥损耗
loss on ignition	灼热损耗
metal adhesive based on phosphate	磷酸盐型金属黏合剂
metal adhesive based on silicate	硅酸盐型金属黏合剂
microporous materials on the base of polyurethane	微孔聚氨酯材料
offset needles on a roller	辊上偏位针
on-line	在生产线上
on-line inspection	生产线上检查
on-line viscosimetry	生产线中黏度测定法
on-off lever	开关操纵杆
on-roll coater	辊刮式涂布机
on roll knife coater	辊刮式涂布机
on-site winding	现场缠绕成型〈特大型增强塑料制品〉
on-strut joint	轴颈和槽上下接缝的粘接
press-on pressure	压紧力〈喷嘴〉
printing on plastics	塑料印刷
residue on distillation	蒸馏残余物
retained on sieve	筛余渣
rough sheet on the rolls	粗滚轧片材
sheet on the rolls	压延片材
sheet on the rolls	辊压片材
shrink on	缩紧〈热状态〉
shrink-on coating	热收缩涂层
shrinking-on	缩紧〈热状态〉
shrunk-on	缩紧
shrunk-on	收缩到..... 上
shrunk-on coating	收缩涂层
shrunk-on flim	收缩薄膜
shrunk-on joint	收缩连接〈塑料管线〉
shrunk-on pipe joint	收缩管连接
shrunk-on sleeve	收缩磁筒
shuttle carriage riding on oblique rail	有倾斜滑轨的穿梭式滑架〈缠绕法〉
spur gear on parallel axes	正齿轮传动
spur gear on parallel axes	平行轴上的正齿轮
styrofoam layer on fabric	织物上的泡沫塑料层
superposed on	重合
superposed on	重叠
time on test	试验延续时间
torque on screw	螺杆扭矩
tube-on die	套筒式电缆挤塑口模
volatile loss on heating	加热挥发损失
wet-on-wet coating	湿-湿涂布
wet-on-wet painting	湿-湿-涂料
wind on	卷取
wind on	缠绕
yellowing on ageing	老化黄变