Terms for subject Bridge construction containing member

English	Chinese
allowable fatigue stress of member	构件的疲劳容许应力
allowable fatigue stress of member or joint	杆件或接头的疲劳容许应力
allowable fatigue stress of various member or joint	各种构件或连接的疲劳容许应力
allowable maximum slender ratio of member	杆件容许最大长细比
allowable maximum slender ratio of partial limb of combined member	组合杆件分肢容许最大长细比
anchor region of end of member	构件端部锚固区
anchoring member	锚定构件
angle between inclined shear reinforcement and longitudinal axis of member	斜向剪力钢筋与杆件纵轴之间的夹角
area of kern of member cross-section	构件核心的面积
assembly of members	杆件组装
auxiliary member	辅助构件
axial compressive combined member	中心受压组合杆件
axially compressed member	轴向受压的杆件
axially compressed member	轴向受压杆
axially loaded compression member	轴向受压杆
axially loaded member	轴向受力杆
axially tensioned member	轴向受拉的杆件
axis of member	杆轴
batten member	缀合杆
batten plate member	缀板杆件
battened member	缀板联结的杆
bearing capacity of connected member	连接杆件的承载能力
bearing member of bridge	桥梁承重杆件
bending member	受弯杆件
bi-eccentrically loaded member	双向偏心受力杆件
block-assembling member	分块装配构件
bolted steel truss with shop-welded members	栓焊钢桁梁
box-section member	箱形截面杆
bracing member	支撑的杆
bracing member	联结杆
bracing member	联系杆
bridge member	桥梁杆件
bucking critical load of member bended in direction of smaller radius of gyration of cross-section	构件顺截面回转半径较小方向弯曲的纵向弯曲临界荷载
buckling analysis of member	杆屈曲分析
buckling in longitudinal plane of member	杆纵平面内的屈曲
built-up compression member	组合压杆
built-up member	组合杆件
built-up member	组合杆
built-up section member	组合截面杆件
cast member	铸件
casting member	铸件
centrally compressed built-up member	中心受压组合杆
centrally compressed member	中心受压杆件
centrally compressed member	中心受压杆
centrally compressed web member	中心受压腹杆
centrally loaded compressive member	中心受压杆件
centre-line of member	杆件中心线
channel member	槽形杆件
chord member	弦 杆
circular cross-section member	圆形截面杆件
coefficient of bulking for compressive member	压杆纵向弯曲系数
cold-formed member	冷制杆
combined member by lacing bars	缀条组合杆件
combined member by stay plates	缀板组合杆件
combined straight member	组合直杆
component member	部件杆件
composite flexural member	组合受挠杆件
composite member	组合杆件
composite member	复合杆件
compression in extreme fiber of member subjected to bending	受弯杆最外纤维中的压力
compression member	受压杆件
compression member of truss	桁架受压杆
compression-bend combined member	压弯组合杆件
compressive member	压杆
compressive member with large eccentricity	大偏心受压杆件
compressive member with small eccentricity	小偏心受压杆件
compressive stress for bending member	弯杆压应力
computing length of compressive member	受压构件的计算长度
computing length of member	构件计算长度
computing length of member	杆件计算长度
computing length of the whole member	整个构件的计算长度
concentrically loaded compression member	受集中荷载的压杆
connected joint of members	构件连接接头
connecting member	连接杆件
connection of member	杆件的联结
connection of members	构件连接
construction member	构件
critical load of member	构件临界荷载
cross member	横杆
cross-section moment of inertia of member	杆件截面惯性矩
cross-section of member	构件截面
cross-section of member	杆件截面
curved member	曲杆
dead weight of member	构件自重
deformed member	变形杆件
diagonal member	斜向杆件
diagonal member	斜杆
diagonal tensile stress in web of bending member	受弯杆的腹板中的斜拉应力
diagonal web member of truss	桁架斜腹杆
distance form center of rivet to edge of member	铆钉中心至构件边缘的距离
distance from centre of bolt to edge of member	螺栓中心至构件边缘距离
double diagonal system with redundant member	带有赘余杆的双向斜杆系统
double riveted member	双行铆杆件
doubly symmetric member	双向对称杆件
dynamically loaded member	承受动力荷载的杆
eccentric compression member with ring section	环形截面偏心受压构件
eccentrically compressed member	偏心受压杆
eccentrically connected member	偏心联结杆
eccentrically-compressed member	偏心受压杆件
eccentrically-tensioned member	偏心受拉杆
eccentricity of axial compressive force in the direction of bending with respect to the gravity centre of average cross-section of member	顺弯曲方向轴向压力对构件平均截面重心的偏心距
effective cross-section area of compressive member	受压构件的有效截面积
effective length of compression member	压力杆的有效长度
effective length of compression member	压杆的有效长度
effective length of compression members of trusses	桁架受压杆件的计算长度
effective length of truss member under axial compression	轴向压力作用下桁架杆件的有效长度
end member	端部杆件
end moments of member	杆端弯矩
ends of member	杆端
entire area of average cross-section of member	构件平均截面的全面积
entire length of member	构件全长
fabricated universal steel members	万能杆件
factor of interaction of members	构件相互影响系数
flange plate of hang member	挂杆翼板
flexurally deformed member	挠曲变形杆
flexure member	挠曲杆件
form of member or joint	构件或连接的形式
four-face reveal member	四面露开的杆件
free member	自由杆件
glued laminated timber member	胶合成层木构件
gravity centre-line of cross-section of member	杆件截面重心线
hang member	挂杆
horizontal shear design for composite concrete flexural member	组合混凝土挠曲杆的水平剪力设计
identical member	同样的杆件
inclined member	斜向杆件
individual member	各别杆件
individual member	单独杆件
individual truss member	单独桁架杆件
inefficient member	无效杆件
in-plane members	面内杆件
interconnected members	相互连接杆件
intercostal member	间断构件
jointless member	无缝杆件
kern of area of member cross-section	构件截面积核心
laced built-up compression member	缀合式组合压杆
laced compression member	缀合压杆
laced member	缀条联结的杆
laced member	缀合杆
larger end moment of member	杆的较大端弯矩
lateral bracing member	侧向斜撑杆
laterally supported member	侧向支承着的杆
laterally unsupported member	侧向未支撑的杆件
lattice member	格式杆件
lattice plate member	缀板杆件
latticed member	缀合杆
length of member	构件长度
lengthening member	接长杆件
lengthening of member	接长杆件
light precast member	轻质预制件
light-gauge structural member	轻型的结构杆件
limiting length of member	构件限制长度
list of members	杆件表
load bearing member	承重构件
local member	局部构件
locally stable open section member	局部稳定的开口载面杆
main member	主要杆件
massive concrete member	大块混凝土杆件
maximum lateral compressive stress of soil on side of member	构件侧面土的最大横向压应力
member axis	杆轴
member borne local live load	承受局部活载的杆件
member composed with two longitudinal components	两纵向构件组成的杆件
member comprised with four components	四构件组成的杆件
member connection	构件连接
member consisting of a single eccentric angle	单根偏心单角钢组成的杆
member force	杆力
member in bending	受弯杆件
member in compression	受压杆件
member in shear	受剪杆件
member in tension	受拉杆件
member interaction coefficient	构件相互影响系数
member list	杆件表
member loaded eccentric load	承受偏心荷载的杆件
member manufacture	构件制造
member not subjecting lateral buckling	不产生侧向屈曲的杆件
member of bracing system	联结系杆件
member partially loaded live load	承受局部活载的杆件
member segment	杆段
member stability	杆件稳定性
member subjected to both axial compression and bending stresses	承受轴向压应力和弯曲应力的杆件
member subjected to combined axial force and bending moment	承受轴向力和弯矩联合作用的杆
member subjected to compression plus biaxial bending	受压且双向弯曲的杆件
member subjected to eccentric load	承受偏心荷载的杆件
member subjected to local live load	承受局部活载的杆件
member subjected to torsion and bending	扭弯杆件
member with arbitrary cross-section	任意截面杆件
member with batten plates	缀板杆件
member with both upper and lower hinged ends	上下端均铰结的杆件
member with built-up section	组合截面杆件
member with full section subjected to compression	全截面受压的杆
member with full section under compression	全截面受压的杆
member with lacing bars	缀条杆件
member with lower fixed end	下端固定杆
member with open section	开口截面构件
member with spiral reinforcement	带有螺旋钢筋的杆件
member with tie plates	缀板杆件
member with unsymmetrical reinforcement	非对称配筋杆件
member with upper free end	上端自由杆件
member with upper-fixed end	上端固定杆件
member without intermediate batten plate	没有中间缀板的杆件
member without transverse force	没有横向力的杆件
members with various lateral support conditions	具有不同横向支承条件的杆件
moment of inertia of member base	构件底面惯性矩
moment of inertia of member crosssection	杆件截面惯性矩
moment of inertia of member shaft	构件身惯性矩
moment of inertia of reinforcement about centroidal axis of member cross-section	对杆件横截面重心轴的钢筋惯性矩
moment of resistance of member cross-section	杆件截面抵抗矩
monolithic section member	整体式截面杆件
net sectional area of riveted or high-strength bolted tension member	铆接或高强度螺栓联结拉杆的净截面积
net spacing of members	构件净距
nonprismatic member	非棱柱形杆
nonprismatic member	非棱性杆
nonredundant member	非赘余杆件
open thin-walled member	开口薄壁杆件
open web member	空腹杆件
perfectly ductile member	完全延性杆件
perforated member	有孔杆
pin connected member	栓接杆
pin-ended member	栓结端的杆
preassembled member	预装配构件
preassembled member	预装杆件
preburied member	预埋杆件
precompressed member	预压构件
prestressed member	预应力构件
principal member	主要杆件
prismatic member	棱形杆
rectangular crosssection member	矩形截面杆件
reduction factor of axial allowable stress of central compressive member	中心受压杆件轴向容许应力的折减系数
reduction of strength due to crack in bending member	受弯杆由于裂缝出现强度降低
redundant member	赘余杆
redundant member	冗余杆
redundant member	多余杆件
relative rigid member	相对刚硬的杆
relative rigid member	比较刚硬的杆
repeating loaded member	反复受力杆件
resistance to deformation of member	杆件变形的阻力抗力
riveted member	铆接杆件
secondary compression member	次压力杆
secondary member	附加杆
secondary member	次要杆
single angle member	单角钢杆
single member	单个构件
slender ratio of combined member	组合杆件长细比
slender ratio of member in acting plane of bending moment	构件在弯矩作用平面内的长细比
slenderness ratio of compression member	压杆的细长比
smaller end moment of member	杆的较小端弯矩
splice node of member	杆件拼接节点
stability of compression member	压杆稳定
standardized member	标准化杆件
standardized-shape member	标准构件
steel compression member	钢压杆
straight member	直杆件
straight member	直杆
structural member	结构构件
structure with multiple-row members	多排构件的结构
structure with several row members	多排构件的结构
structure with single row members	单排构件的结构
submember subsidiary member	辅助构件
suspension member	吊杆
system of interconnected members	相互连结杆系
tensile member	拉杆
tension member	受拉杆件
tension member	拉力杆件
the P-△ effect in slender member	细长杆件的P-△效应
the whole length of member	构件全长
thin-walled member with closed section	闭口薄壁杆件
thin-walled member with open cross-section	开口薄壁杆件
tie member	系杆
tie plate member	带缀板的杆件
truss member	桁架杆件
tubular member	管形杆
two-face reveal member	两面露开的杆件
unloaded member	不受载杆件
unrestrained member	无约束的杆
variable member	变截面杆
vertical member	竖杆
vierendeel member	空腹杆件
web member buckling in the plane of truss	腹杆在桁架平面内的屈曲
web member system	腹杆系
welded box-member	焊接箱型杆件
welded H-member	焊接 H 杆件
welded member	焊接杆件
wide flange member	宽缘杆