 |
|
Subject: Slide Valve Stop gen. 4. Calibration of Refrigeration Compressor Slide Valves and Slide Valve Stop (Volume Control)This requires load of greater than 100% for 1 compressor in order to do because the compressor must be on load and available to go from 0 to 100% of load to calibrate the valves so this needs to be done once enough wells are on line to have gas flow > 50% of design (~20 MMSCFD or 22,325.00 Nm3/hr). Note that currently, the calibration is definitely not correct on compressor C-123 and the two valve fight each other whenever the slide valve position is >40% open position. помогите. как лучше взять? slide valve stop? |
| You need to be logged in to post in the forum |