 |
|
Subject: Sink Resistor and Source Resistor Люди добрые, помогите перевести Sink Resistor and Source Resistor в следующем контексте:Encoder inputs can be configured as source or sink inputs with the PTP (point-to-point) Control Module and SAM (servo axis module) jumper selections described in the Installation section of this manual. When configured as source inputs, both the noninverted and inverted inputs for each encoder signal will have an internal source resistor (pull-up) connected. This input is designed to source current into the differential receiver in an open circuit condition or high state. When configured as sink inputs, both the noninverted and inverted inputs for each encoder signal will have an internal sink resistor (pull-down) connected. This input is designed to sink current from the differential receiver in an open circuit condition or low state. Заранее спасибо! |
| Есть мысли что это подтягивающий и тормозной резисторы соответственно, кто как думает?! |
| подтягивающий и нагрузочный |
| You need to be logged in to post in the forum |