|
link 8.08.2007 7:42 |
Subject: Блок-звёздочка как и вчера , просто перечень деталей компонентов буровой установкитаблица деталей, которые взвешивали контекста больше нет Корпус гидравл звездочку я перевел как star gear |
При приводе лебедки мощность суммируется в коробке скоростей трехдизельного блока, откуда передается на лебедку с помощью цепной передачи с z = 27 и z = 41. Блок-звездочка с z = 34/39, расположенная на подшипниках качения трансмиссионного вала лебедки, допускает одновременное использование мощности трехдизельного блока для привода ротора и регулятора подачи долота и для привода вала барабана лебедки. если исходить из этого отрывка то получается звездочка как и у велосипеда.... |
получается что-то со sprocket по-моему http://www.sprocketspecialists.com/ http://en.wikipedia.org/wiki/Sprocket * 1 Cycles [edit] Cycles In the case of bicycle chains by varying the size (and therefore, the tooth count) of the sprockets on each side of the chain, modifying the overall gear ratio of the chain drive is possible. This is the basis of Derailleur gears. A 10-speed bicycle, by providing two different-sized driving sprockets and five different-sized driven sprockets, allows up to ten different gear ratios. The resulting lower gear ratios make the bike easier to pedal up hills while the higher gear ratios make the bike faster to pedal on flat roads. In a similar way, manually changing the sprockets on a motorcycle can change the characteristics of acceleration and top speed by modifying the final drive gear ratio. [edit] Tracked vehicles In the case of vehicles with caterpillar tracks the engine-driven toothed-wheel transmitting motion to the tracks is known as the drive sprocket and may be positioned at the front or back of the vehicle, or in some cases, both. [edit] Film and paper Sprockets are used in the film transport mechanisms of movie projectors and movie cameras. In this case, the sprocket wheels engage film perforations in the film stock. Sprocket feed was also used for punched tape and is used for paper feed to some computer printers.
|
sprocket cluster |
similar to gear cluster |
You need to be logged in to post in the forum |